Original file

Volkswagen Transporter Bosch EDC17CP20 03L906019FK / 1037532889

An original (stock) flash read of the Bosch EDC17CP20 control unit, fitted in Volkswagen Transporter, hardware number 03L906019FK and software number 1037532889, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Transporter2.0 diesel · 140.0PS / 103.0kW
Control unit
Bosch EDC17CP20
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
03L906019FK
Software number
1037532889
Vehicle maker's hardware number
03L907309M

Technical data

Vehicle
BrandVolkswagen
Car modelTransporter
Engine2.0 diesel
Power140.0PS / 103.0kW
Control unit
Control unitBosch EDC17CP20
ECU makerBosch
Hardware number03L906019FK
Software number1037532889
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key55e74032a3ce2633
Identification read from the file
ECU nameEDC17CP20
Read typeFull read (boot area included)
Bosch part / software1037532889Offset in the file: 0x02001A
Vehicle maker's hardware number03L907309MOffset in the file: 0x0582BE
Software / calibration03L906019FK · version 5583Offset in the file: 0x0582D8
Bosch project identifier (EPK)36/1/EDC17_CP20/5/P755//C755BD5WU///Offset in the file: 0x020A10

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP20 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906019FK and software number 1037532889. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Volkswagen TransporterFlash2,048.00 KB€15Add to cart
Volkswagen TransporterFlash2,048.00 KB€15Add to cart
Volkswagen TransporterFlash2,048.00 KB€15Add to cart
Volkswagen T6 2.0 TDI CRFlash2,048.00 KB€15Add to cart
Volkswagen Passat CR 2013 TurboFlash · From the file name: VW Passat 2.0 TDI CR2,048.00 KB€15Add to cart
Volkswagen Transporter 2.0 TDIFlash2,048.00 KB€15Add to cart

All reads of 03L906019FK / 1037532889

Other pairs of Bosch EDC17CP20

HardwareSoftwareVehicles
03L906019FJ10SW086156Volkswagen Transporter
03L906019FK084255Volkswagen Transporter 2.0 TDI
03L906019FK1037522960Volkswagen Transporter
03L906019FK1037525529Volkswagen Transporter, Volkswagen Transporter 2.0 TDI, Volkswagen Transporter CR 2013 Turbo
03L906019FK1037542286Volkswagen Transporter, Volkswagen pcmflash, Volkswagen Transporter 5
03L906019FK1037550987Volkswagen Transporter, Volkswagen pcmflash
03L906019FK1037558517Volkswagen Transporter 2.0 TDI
03L906019FK1037558552Volkswagen Transporter, Volkswagen Transporter 2.0 TDI, Volkswagen pcmflash

Bosch EDC17CP20 original files

The Bosch EDC17CP20 unit page