Original file

Volkswagen Transporter Bosch EDC17CP20 03L906019FL / 1037522888

An original (stock) flash read of the Bosch EDC17CP20 control unit, fitted in Volkswagen Transporter, hardware number 03L906019FL and software number 1037522888, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Transporter2.0 diesel 140PS
Control unit
Bosch EDC17CP20
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
03L906019FL
Software number
1037522888
Vehicle maker's hardware number
03L907309M

Technical data

Vehicle
BrandVolkswagen
Car modelTransporter
Engine2.0 diesel 140PS
Power140.0PS / 103.0kW
Control unit
Control unitBosch EDC17CP20
ECU makerBosch
Hardware number03L906019FL
Software number1037522888
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key713d51b1657f2f92
Identification read from the file
ECU nameEDC17CP20
Read typeCalibration only (data set)
Bosch part / software1037522888Offset in the file: 0x02001A
Vehicle maker's hardware number03L907309MOffset in the file: 0x05811E
Software / calibration03L906019FL · version 1508Offset in the file: 0x058138
Bosch project identifier (EPK)36/1/EDC17_CP20/5/P755//C755BD5WS///Offset in the file: 0x020A10

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP20 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906019FL and software number 1037522888. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP20

HardwareSoftwareVehicles
03L906019FK1037550987Volkswagen Transporter, Volkswagen pcmflash
03L906019FK1037558517Volkswagen Transporter 2.0 TDI
03L906019FK1037558552Volkswagen Transporter, Volkswagen Transporter 2.0 TDI, Volkswagen pcmflash
03L906019FK10SW084255Volkswagen Transporter
03L906019FL1037524684Volkswagen Transporter, Volkswagen T6 2.0 TDI CR, Volkswagen Transporter 2.0 TDI
03L906019FL1037532892Volkswagen Transporter, Volkswagen Transporter 2.0 TDI, Volkswagen T6 2.0 TDI CR
03L906019FL1037542287Volkswagen Transporter, Volkswagen pcmflash, Volkswagen Transporter T5
03L906019FL1037550957Volkswagen Transporter, Volkswagen pcmflash, Volkswagen Transporter T6

Bosch EDC17CP20 original files

The Bosch EDC17CP20 unit page