Original file

Volkswagen Transporter Bosch EDC17CP20 03L906019FP / 10SW084253

An original (stock) flash read of the Bosch EDC17CP20 control unit, fitted in Volkswagen Transporter, hardware number 03L906019FP and software number 10SW084253, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Transporter2.0 diesel 140PS
Control unit
Bosch EDC17CP20
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
03L906019FP
Software number
10SW084253
Vehicle maker's hardware number
03L907309M

Technical data

Vehicle
BrandVolkswagen
Car modelTransporter
Engine2.0 diesel 140PS
Power140.0PS / 103.0kW
Control unit
Control unitBosch EDC17CP20
ECU makerBosch
Hardware number03L906019FP
Software number10SW084253
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key2a23b54bbf21a797
Identification read from the file
ECU nameEDC17CP20
Read typeOBD read (no boot area)
Bosch part / software10SW084253Offset in the file: 0x08001A
Vehicle maker's hardware number03L907309MOffset in the file: 0x0582BE
Software / calibration03L906019FP · version 9978Offset in the file: 0x0582D8
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FC54
Bosch project identifier (EPK)36/1/EDC17_CP20/5/P755//C755BD5WU///Offset in the file: 0x020A10

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP20 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906019FP and software number 10SW084253. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP20

HardwareSoftwareVehicles
03L906019FP1037525511Volkswagen pcmflash, Volkswagen Transporter
03L906019FP1037532894Volkswagen pcmflash, Volkswagen Transporter, Volkswagen 2.0TDI
03L906019FP1037542261Volkswagen Transporter 2.0 TDI, Volkswagen pcmflash
03L906019FP1037558531Volkswagen Transporter, Volkswagen pcmflash
03L906019FQ1037525506Volkswagen Transporter, Volkswagen pcmflash
03L906019FQ1037532898Volkswagen Transporter, Volkswagen pcmflash
03L906019FQ1037542252Volkswagen Transporter 2.0 TDI, Volkswagen pcmflash
03L906019FQ10SW086894Volkswagen Transporter

Bosch EDC17CP20 original files

The Bosch EDC17CP20 unit page