Original file

Volkswagen pcmflash Bosch EDC17CP20 03L906019G / 1037526361

An original (stock) flash read of the Bosch EDC17CP20 control unit, fitted in Volkswagen pcmflash, hardware number 03L906019G and software number 1037526361, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen pcmflash2.0 diesel 163PS
Control unit
Bosch EDC17CP20
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
03L906019G
Software number
1037526361
Vehicle maker's hardware number
03L907309K

Technical data

Vehicle
BrandVolkswagen
Car modelpcmflash
Engine2.0 diesel 163PS
Power163.2PS / 120.0kW
Control unit
Control unitBosch EDC17CP20
ECU makerBosch
Hardware number03L906019G
Software number1037526361
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key6318e56af1ca36eb
Identification read from the file
ECU nameEDC17CP20
Read typeFull read (boot area included)
Bosch part / software1037526361Offset in the file: 0x08001A
Vehicle maker's hardware number03L907309KOffset in the file: 0x04E634
Software / calibration03L906019G · version 9748Offset in the file: 0x04E64E
Bosch project identifier (EPK)35/1/EDC17_CP20/5/P755//C755W5B5///Offset in the file: 0x020A10

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP20 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906019G and software number 1037526361. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP20

HardwareSoftwareVehicles
03L906019FT1037532899Volkswagen pcmflash, Volkswagen Transporter
03L906019FT1037542258Volkswagen pcmflash, Volkswagen Transporter
03L906019FT10SW086895Volkswagen Transporter
03L906019G1037518097Volkswagen pcmflash
03L906019G1037561066Volkswagen pcmflash
03L906019GA1037525510Volkswagen Transporter 2.0 TDI, Volkswagen Transporter
03L906019GA1037532896Volkswagen pcmflash, Volkswagen Transporter
03L906019GA1037542260Volkswagen Transporter 2.0 TDI, Volkswagen pcmflash

Bosch EDC17CP20 original files

The Bosch EDC17CP20 unit page