Original file

Volkswagen Transporter 2.0 TDI Bosch EDC17CP20 03L906019GE / 1037524686

An original (stock) flash read of the Bosch EDC17CP20 control unit, fitted in Volkswagen Transporter 2.0 TDI, hardware number 03L906019GE and software number 1037524686, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Transporter 2.0 TDI2.0 diesel 102.0PS / 75.0kW
Control unit
Bosch EDC17CP20
Read type
Full read (boot area included)
File
2,048.00 KB · Flash
Hardware number
03L906019GE
Software number
1037524686
Vehicle maker's hardware number
03L907309L

Technical data

Vehicle
BrandVolkswagen
Car modelTransporter 2.0 TDI
Engine2.0 diesel 102.0PS / 75.0kW
Control unit
Control unitBosch EDC17CP20
ECU makerBosch
Hardware number03L906019GE
Software number1037524686
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key89a8f84255ab1b51
Identification read from the file
ECU nameEDC17CP20
Read typeFull read (boot area included)
Bosch part / software1037524686Offset in the file: 0x08001A
Vehicle maker's hardware number03L907309LOffset in the file: 0x0582BA
Software / calibration03L906019GE · version 3311Offset in the file: 0x0582D4
Bosch project identifier (EPK)36/1/EDC17_CP20/5/P755//C755BD5WT///Offset in the file: 0x020A10

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP20 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906019GE and software number 1037524686. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP20

HardwareSoftwareVehicles
03L906019GD1037535303Volkswagen Transporter, Volkswagen pcmflash
03L906019GD1037542244Volkswagen Transporter, Volkswagen Transporter / Multivan 2.0 TDI, Volkswagen pcmflash
03L906019GD10SW086151Volkswagen Transporter
03L906019GE086150Volkswagen Transporter
03L906019GE1037535319Volkswagen Transporter 2.0 TDI, Volkswagen Transporter
03L906019GE1037544657Volkswagen Transporter, Volkswagen Transporter / Multivan 2.0 TDI, Volkswagen Transporter 2.0 TDI
03L906019GE10SW086150Volkswagen Transporter
03L906019GF1037515577Volkswagen Transporter

Bosch EDC17CP20 original files

The Bosch EDC17CP20 unit page