Original file

Volkswagen Transporter Bosch EDC17CP20 03L906019GF / 1037515577

An original (stock) flash read of the Bosch EDC17CP20 control unit, fitted in Volkswagen Transporter, hardware number 03L906019GF and software number 1037515577, 2,176.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Transporter2.0 diesel 84PS
Control unit
Bosch EDC17CP20
Read type
OBD read (no boot area)
File
2,176.00 KB · Flash
Hardware number
03L906019GF
Software number
1037515577
Bosch part / software
1037525515
Vehicle maker's hardware number
03L907309M

Technical data

Vehicle
BrandVolkswagen
Car modelTransporter
Engine2.0 diesel 84PS
Power84.3PS / 62.0kW
Control unit
Control unitBosch EDC17CP20
ECU makerBosch
Hardware number03L906019GF
Software number1037515577
File
File typeOriginal flash read
File size2,176.00 KB (2,228,224 bytes)
File keye37e3f290ebb32b1
Identification read from the file
ECU nameEDC17CP20
Read typeOBD read (no boot area)
ProcessorTC1796
Bosch part / software1037525515Offset in the file: 0x08001A
Vehicle maker's hardware number03L907309MOffset in the file: 0x0582BA
Software / calibration03L906019GF · version 3312Offset in the file: 0x0582D4
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FC54
Bosch project identifier (EPK)36/1/EDC17_CP20/5/P755//C755BD5WT///Offset in the file: 0x020A10

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP20 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906019GF and software number 1037515577. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP20

HardwareSoftwareVehicles
03L906019GE1037524686Volkswagen Transporter 2.0 TDI
03L906019GE1037535319Volkswagen Transporter 2.0 TDI, Volkswagen Transporter
03L906019GE1037544657Volkswagen Transporter, Volkswagen Transporter / Multivan 2.0 TDI, Volkswagen Transporter 2.0 TDI
03L906019GE10SW086150Volkswagen Transporter
03L906019GF1037525515Volkswagen Transporter, Volkswagen Transporter / Multivan 2.0 TDI, Volkswagen Transporter 2.0 TDI
03L906019GF1037535307Volkswagen Transporter, Volkswagen Transporter 2.0 TDI, Volkswagen pcmflash
03L906019GF1037542245Volkswagen Transporter, Volkswagen Transporter 2.0 TDI, Volkswagen pcmflash
03L906019GF10SW086149Volkswagen Transporter

Bosch EDC17CP20 original files

The Bosch EDC17CP20 unit page