Original file

Volkswagen Transporter Bosch EDC17CP20 03L906019GG / 1037544659

An original (stock) flash read of the Bosch EDC17CP20 control unit, fitted in Volkswagen Transporter, hardware number 03L906019GG and software number 1037544659, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Transporter2.0 diesel · 102.0PS / 75.0kW
Control unit
Bosch EDC17CP20
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
03L906019GG
Software number
1037544659
Vehicle maker's hardware number
03L907309M

Technical data

Vehicle
BrandVolkswagen
Car modelTransporter
Engine2.0 diesel
Power102.0PS / 75.0kW
Control unit
Control unitBosch EDC17CP20
ECU makerBosch
Hardware number03L906019GG
Software number1037544659
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keye946de3b5fc41fed
Identification read from the file
ECU nameEDC17CP20
Read typeOBD read (no boot area)
ProcessorTC1796
Bosch part / software1037544659Offset in the file: 0x08001A
Vehicle maker's hardware number03L907309MOffset in the file: 0x0582BE
Software / calibration03L906019GG · version 6291Offset in the file: 0x0582D8
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FC54
Bosch project identifier (EPK)36/1/EDC17_CP20/5/P755//C755BD5WU///Offset in the file: 0x020A10

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP20 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906019GG and software number 1037544659. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

All reads of 03L906019GG / 1037544659

Other pairs of Bosch EDC17CP20

HardwareSoftwareVehicles
03L906019GF1037542245Volkswagen Transporter, Volkswagen Transporter 2.0 TDI, Volkswagen pcmflash
03L906019GF10SW086149Volkswagen Transporter
03L906019GG1037524687Volkswagen Transporter, Volkswagen Transporter / Multivan 2.0 TDI, Volkswagen Transporter 2.0 TDI
03L906019GG1037535316Volkswagen Transporter, Volkswagen Transporter 2.0 TDI, Volkswagen Passat CR 2014 Turbo
03L906019GG10SW086148Volkswagen Transporter
03L906019GH086897Volkswagen Transporter 2.0 TDI
03L906019GH1037525525Volkswagen Transporter, Volkswagen Transporter 2.0 TDI, Volkswagen Transporter / Multivan 2.0 TDI
03L906019GH1037532881Volkswagen Transporter, Volkswagen Transporter 2.0 TDI, Volkswagen pcmflash

Bosch EDC17CP20 original files

The Bosch EDC17CP20 unit page