Original file

Volkswagen Transporter Bosch EDC17CP20 03L906019GH / 10SW086897

An original (stock) flash read of the Bosch EDC17CP20 control unit, fitted in Volkswagen Transporter, hardware number 03L906019GH and software number 10SW086897, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Transporter2.0 diesel 140PS
Control unit
Bosch EDC17CP20
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
03L906019GH
Software number
10SW086897
Vehicle maker's hardware number
03L907309M

Technical data

Vehicle
BrandVolkswagen
Car modelTransporter
Engine2.0 diesel 140PS
Power140.0PS / 103.0kW
Control unit
Control unitBosch EDC17CP20
ECU makerBosch
Hardware number03L906019GH
Software number10SW086897
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyb7a3f3403b21dfd5
Identification read from the file
ECU nameEDC17CP20
Read typeOBD read (no boot area)
Bosch part / software10SW086897Offset in the file: 0x08001A
Vehicle maker's hardware number03L907309MOffset in the file: 0x0582BE
Software / calibration03L906019GH · version 9977Offset in the file: 0x0582D8
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FC54
Bosch project identifier (EPK)36/1/EDC17_CP20/5/P755//C755BD5WU///Offset in the file: 0x020A10

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP20 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906019GH and software number 10SW086897. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP20

HardwareSoftwareVehicles
03L906019GH1037525525Volkswagen Transporter, Volkswagen Transporter 2.0 TDI, Volkswagen Transporter / Multivan 2.0 TDI
03L906019GH1037532881Volkswagen Transporter, Volkswagen Transporter 2.0 TDI, Volkswagen pcmflash
03L906019GH1037542265Volkswagen Transporter, Volkswagen Transporter / Multivan 2.0 TDI, Volkswagen Transporter 2.0 TDI
03L906019GH1037550960Volkswagen Transporter, Volkswagen Transporter / Multivan 2.0 TDI, Volkswagen Transporter T6 2.0 TDI CR
03L906019GJ1037524688Volkswagen Transporter, Volkswagen Transporter 2.0 TDI, Volkswagen Transporter 2.0 TDI CR DPF
03L906019GJ1037532882Volkswagen pcmflash, Volkswagen Transporter
03L906019GJ1037542262Volkswagen Transporter, Volkswagen pcmflash
03L906019GJ1037550956Volkswagen Transporter 2.0 TDI, Volkswagen pcmflash, Volkswagen Transporter

Bosch EDC17CP20 original files

The Bosch EDC17CP20 unit page