Original file

Volkswagen Transporter Bosch EDC17CP20 03L906019GL / 1037550916

An original (stock) flash read of the Bosch EDC17CP20 control unit, fitted in Volkswagen Transporter, hardware number 03L906019GL and software number 1037550916, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Transporter2.0 · 179.5PS / 132.0kW
Control unit
Bosch EDC17CP20
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
03L906019GL
Software number
1037550916
Vehicle maker's hardware number
03L907309L

Technical data

Vehicle
BrandVolkswagen
Car modelTransporter
Engine2.0
FuelDiesel
Power179.5PS / 132.0kW
Control unit
Control unitBosch EDC17CP20
ECU makerBosch
Hardware number03L906019GL
Software number1037550916
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keye2747e898bc848d0
Identification read from the file
ECU nameEDC17CP20
Read typeFull read (boot area included)
Bosch part / software1037550916Offset in the file: 0x02001A
Vehicle maker's hardware number03L907309LOffset in the file: 0x05C082
Software / calibration03L906019GL · version 8373Offset in the file: 0x05C09C
Bosch project identifier (EPK)36/1/EDC17_CP20/5/P755//C755BW5WU///Offset in the file: 0x020A10

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP20 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906019GL and software number 1037550916. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

All reads of 03L906019GL / 1037550916

Other pairs of Bosch EDC17CP20

HardwareSoftwareVehicles
03L906019GK10SW103863Volkswagen Transporter
03L906019GL1037525514Volkswagen Transporter, Volkswagen pcmflash, Volkswagen Transporter T6
03L906019GL1037536194Volkswagen Transporter, Volkswagen Transporter 2.0 BiTDI, Volkswagen Transporter T6
03L906019GL1037542233Volkswagen Transporter, Volkswagen Transporter T6 2.0 TDI CR Biturbo, Volkswagen pcmflash
03L906019GL10SW103862Volkswagen Transporter
03L906019GM1037524689Volkswagen Transporter, Volkswagen Transporter CR 2012 Turbo, Volkswagen pcmflash
03L906019GM1037526340Volkswagen Transporter, Volkswagen pcmflash, Volkswagen Amarok
03L906019GM1037536196Volkswagen Transporter, Volkswagen pcmflash

Bosch EDC17CP20 original files

The Bosch EDC17CP20 unit page