Original file

Volkswagen Transporter 2.0 TDI Bosch EDC17CP20 03L906019GS / 10SW086146 P755D5WU

An original (stock) flash read of the Bosch EDC17CP20 control unit, fitted in Volkswagen Transporter 2.0 TDI, hardware number 03L906019GS and software number 10SW086146 P755D5WU, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Transporter 2.0 TDI2.0 diesel 140.0PS / 103.0kW
Control unit
Bosch EDC17CP20
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
03L906019GS
Software number
10SW086146 P755D5WU
Bosch part / software
10SW086146
Vehicle maker's hardware number
03L907309L

Technical data

Vehicle
BrandVolkswagen
Car modelTransporter 2.0 TDI
Engine2.0 diesel 140.0PS / 103.0kW
Control unit
Control unitBosch EDC17CP20
ECU makerBosch
Hardware number03L906019GS
Software number10SW086146 P755D5WU
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key05be632f72d392e3
Identification read from the file
ECU nameEDC17CP20
Read typeFull read (boot area included)
Bosch part / software10SW086146Offset in the file: 0x02001A
Vehicle maker's hardware number03L907309LOffset in the file: 0x0582BE
Software / calibration03L906019GS · version 9978Offset in the file: 0x0582D8
Bosch project identifier (EPK)36/1/EDC17_CP20/5/P755//C755BD5WU///Offset in the file: 0x020A10

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP20 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906019GS and software number 10SW086146 P755D5WU. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP20

HardwareSoftwareVehicles
03L906019GS1037532890Volkswagen Transporter, Volkswagen Transporter 2.0 TDI
03L906019GS1037542274Volkswagen Transporter, Volkswagen Transporter 2.0 TDI, Volkswagen pcmflash
03L906019GS1037560553Volkswagen Transporter 2.0 TDI, Volkswagen pcmflash
03L906019GS10SW086146Volkswagen Transporter
03L906019GT1037525571Volkswagen pcmflash, Volkswagen Transporter
03L906019GT1037532893Volkswagen pcmflash, Volkswagen Transporter
03L906019GT1037542289Volkswagen Transporter 2.0 TDI, Volkswagen pcmflash
03L906019GT10SW084424Volkswagen Transporter

Bosch EDC17CP20 original files

The Bosch EDC17CP20 unit page