Original file

Volkswagen Transporter Bosch EDC17CP20 03L906019HP / 10SW086536

An original (stock) flash read of the Bosch EDC17CP20 control unit, fitted in Volkswagen Transporter, hardware number 03L906019HP and software number 10SW086536, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Transporter2.0 diesel 84PS
Control unit
Bosch EDC17CP20
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
03L906019HP
Software number
10SW086536
Vehicle maker's hardware number
03L907309L

Technical data

Vehicle
BrandVolkswagen
Car modelTransporter
Engine2.0 diesel 84PS
Power84.3PS / 62.0kW
Control unit
Control unitBosch EDC17CP20
ECU makerBosch
Hardware number03L906019HP
Software number10SW086536
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key397653ecb29c0164
Identification read from the file
ECU nameEDC17CP20
Read typeOBD read (no boot area)
Bosch part / software10SW086536Offset in the file: 0x08001A
Vehicle maker's hardware number03L907309LOffset in the file: 0x0582BA
Software / calibration03L906019HP · version 9977Offset in the file: 0x0582D4
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FC54
Bosch project identifier (EPK)36/1/EDC17_CP20/5/P755//C755BD5WT///Offset in the file: 0x020A10

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP20 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906019HP and software number 10SW086536. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP20

HardwareSoftwareVehicles
03L906019HM10SW103854Volkswagen Transporter
03L906019HP1037515541Volkswagen Transporter
03L906019HP1037521639Volkswagen pcmflash
03L906019HP1037525572Volkswagen Transporter 2.0 TDI, Volkswagen pcmflash
03L906019JB1037525530Volkswagen pcmflash, Volkswagen Transporter
03L906019JB1037535306Volkswagen pcmflash, Volkswagen Transporter
03L906019JB1037542254Volkswagen Transporter 2.0 TDI, Volkswagen pcmflash
03L906019JM1037535347Volkswagen T6 2.0 TDI CR, Volkswagen pcmflash

Bosch EDC17CP20 original files

The Bosch EDC17CP20 unit page