Original file

Volkswagen Transporter Bosch EDC17CP20 03L906019LB / 10SW103851

An original (stock) flash read of the Bosch EDC17CP20 control unit, fitted in Volkswagen Transporter, hardware number 03L906019LB and software number 10SW103851, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Transporter2.0 diesel 179PS
Control unit
Bosch EDC17CP20
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
03L906019LB
Software number
10SW103851
Vehicle maker's hardware number
03L907309L

Technical data

Vehicle
BrandVolkswagen
Car modelTransporter
Engine2.0 diesel 179PS
Power179.5PS / 132.0kW
Control unit
Control unitBosch EDC17CP20
ECU makerBosch
Hardware number03L906019LB
Software number10SW103851
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key3ed023bba7cbd74e
Identification read from the file
ECU nameEDC17CP20
Read typeOBD read (no boot area)
Bosch part / software10SW103851Offset in the file: 0x08001A
Vehicle maker's hardware number03L907309LOffset in the file: 0x05C082
Software / calibration03L906019LB · version 9982Offset in the file: 0x05C09C
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FC54
Bosch project identifier (EPK)36/1/EDC17_CP20/5/P755//C755BW5WU///Offset in the file: 0x020A10

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP20 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906019LB and software number 10SW103851. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP20

HardwareSoftwareVehicles
03L906019KF1037536233Volkswagen Transporter, Volkswagen T6 2.0 TDI CR, Volkswagen Transporter 2.0 TDI
03L906019KF10SW086145Volkswagen Transporter
03L906019KH1037542221Volkswagen Transporter
03L906019KH10SW086905Volkswagen Transporter
03L906022CB03L907309MVolkswagen Transporter 5
03L906022CB1037504738Audi A5, Audi Transporter, Volkswagen
03L906022CB1037505939Volkswagen Transporter, Volkswagen Transporter 6
03L906022CB1037510316Volkswagen Transporter, Volkswagen pcmflash

Bosch EDC17CP20 original files

The Bosch EDC17CP20 unit page