Original file

Volkswagen Transporter Bosch EDC17CP20 03L906022CK / 10SW086379

An original (stock) flash read of the Bosch EDC17CP20 control unit, fitted in Volkswagen Transporter, hardware number 03L906022CK and software number 10SW086379, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Transporter2.0 diesel 140PS
Control unit
Bosch EDC17CP20
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
03L906022CK
Software number
10SW086379
Vehicle maker's hardware number
03L907309M

Technical data

Vehicle
BrandVolkswagen
Car modelTransporter
Engine2.0 diesel 140PS
Power140.0PS / 103.0kW
Control unit
Control unitBosch EDC17CP20
ECU makerBosch
Hardware number03L906022CK
Software number10SW086379
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key99c82467568adc3c
Identification read from the file
ECU nameEDC17CP20
Read typeOBD read (no boot area)
Bosch part / software10SW086379Offset in the file: 0x08001A
Vehicle maker's hardware number03L907309MOffset in the file: 0x04AF00
Software / calibration03L906022CK · version 9979Offset in the file: 0x04AF1A
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FC54
Bosch project identifier (EPK)35/1/EDC17_CP20/5/P755//C755D5B5///Offset in the file: 0x020A10

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP20 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906022CK and software number 10SW086379. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP20

HardwareSoftwareVehicles
03L906022CK1037505972Volkswagen Transporter 2.0 TDI, Volkswagen Transporter, Volkswagen T6
03L906022CK1037510322Volkswagen pcmflash
03L906022CK1037515508Volkswagen pcmflash
03L906022CK1037518140Volkswagen Transporter, Volkswagen Transporter 2.0 TDI, Volkswagen Transporter CR 2010 Turbo
03L906022CS1037507693Volkswagen Amarok 2000 BiTDI
03L906022CS1037518074Volkswagen pcmflash, Volkswagen Amarok 2000 BiTDI, Volkswagen Amarok
03L906022CS1037526362Volkswagen Amarok, Volkswagen pcmflash
03L906022CS1037561070Volkswagen Amarok 2.0 BiTDI, Volkswagen pcmflash, Volkswagen Amarok

Bosch EDC17CP20 original files

The Bosch EDC17CP20 unit page