Original file

Volkswagen Transporter Bosch EDC17CP20 03L906022JB / 1037507686

An original (stock) flash read of the Bosch EDC17CP20 control unit, fitted in Volkswagen Transporter, hardware number 03L906022JB and software number 1037507686, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Transporter2.0 · 179.5PS / 132.0kW
Control unit
Bosch EDC17CP20
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
03L906022JB
Software number
1037507686
Vehicle maker's hardware number
03L907309H

Technical data

Vehicle
BrandVolkswagen
Car modelTransporter
Engine2.0
FuelDiesel
Power179.5PS / 132.0kW
Control unit
Control unitBosch EDC17CP20
ECU makerBosch
Hardware number03L906022JB
Software number1037507686
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key34980b0fab87135e
Identification read from the file
ECU nameEDC17CP20
Read typeCalibration only (data set)
Bosch part / software1037507686Offset in the file: 0x02001A
Vehicle maker's hardware number03L907309HOffset in the file: 0x04F7CC
Software / calibration03L906022JB · version 6648Offset in the file: 0x04F7E6
Bosch project identifier (EPK)35/1/EDC17_CP20/5/P755//C755W580///Offset in the file: 0x020A10

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP20 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906022JB and software number 1037507686. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP20

HardwareSoftwareVehicles
03L906022GK1037509992Volkswagen Transporter 2.0 TDI, Volkswagen Transporter
03L906022GK1037515510Volkswagen pcmflash, Volkswagen Transporter
03L906022GK1037521024Volkswagen Transporter, Volkswagen pcmflash, Volkswagen Transporter T6
03L906022GK10SW086375Volkswagen Transporter
03L906022JB1037509951Volkswagen Transporter, Volkswagen pcmflash
03L906022JB1037515249Volkswagen Transporter, Volkswagen pcmflash, Volkswagen T5
03L906022JB1037518077Volkswagen Transporter, Volkswagen Transporter 2.0 BiTDI, Volkswagen Transporter 2.0 BiTDI CR DPF
03L906022JB1037544658Volkswagen pcmflash, Volkswagen Transporter

Bosch EDC17CP20 original files

The Bosch EDC17CP20 unit page