Original file

Audi pcmflash Bosch EDC17CP20 03L906022RM / 1037561010

An original (stock) flash read of the Bosch EDC17CP20 control unit, fitted in Audi pcmflash, hardware number 03L906022RM and software number 1037561010, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi pcmflash2.0 diesel 170PS
Control unit
Bosch EDC17CP20
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
03L906022RM
Software number
1037561010
Vehicle maker's hardware number
03L906019AL

Technical data

Vehicle
BrandAudi
Car modelpcmflash
Engine2.0 diesel 170PS
Power170.0PS / 125.0kW
Control unit
Control unitBosch EDC17CP20
ECU makerBosch
Hardware number03L906022RM
Software number1037561010
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key68538672de82ea03
Identification read from the file
ECU nameEDC17CP20
Read typeFull read (boot area included)
Bosch part / software1037561010Offset in the file: 0x04001A
Vehicle maker's hardware number03L906019ALOffset in the file: 0x1AD6B4
Software / calibration03L906022RM · version 9978Offset in the file: 0x1AD6CB
Bosch project identifier (EPK)35/1/EDC17_CP20/5/P850//C850F54C///Offset in the file: 0x056EDC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP20 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906022RM and software number 1037561010. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP20

HardwareSoftwareVehicles
03L906022RM1037504771Volkswagen pcmflash
03L906022RM1037505482Volkswagen pcmflash
03L906022RM1037515516Volkswagen pcmflash
03L906022RM1037560520Volkswagen pcmflash
03L906022SC1037500160Volkswagen pcmflash
03L906022SC1037508221Volkswagen pcmflash
03L906022SC1037513693Volkswagen pcmflash
03L906022SC1037563600Volkswagen pcmflash

Bosch EDC17CP20 original files

The Bosch EDC17CP20 unit page