Original file

Volkswagen Crafter Bosch EDC17CP20 076906022G / 1037510918

An original (stock) flash read of the Bosch EDC17CP20 control unit, fitted in Volkswagen Crafter, hardware number 076906022G and software number 1037510918, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Crafter2.5 diesel · 163.0PS / 119.9kW
Control unit
Bosch EDC17CP20
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
076906022G
Software number
1037510918

Technical data

Vehicle
BrandVolkswagen
Car modelCrafter
Engine2.5 diesel
Power163.0PS / 119.9kW
Control unit
Control unitBosch EDC17CP20
ECU makerBosch
Hardware number076906022G
Software number1037510918
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file name443
File keyb0bbdddda5fcb5d3
Identification read from the file
ECU nameEDC17CP20
Read typeOBD read (no boot area)
ProcessorTC1796
Bosch part / software1037510918Offset in the file: 0x04001A
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FB66
Bosch project identifier (EPK)35/1/EDC17_CP20/3/P672//C672R4KG///Offset in the file: 0x05B48C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP20 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 076906022G and software number 1037510918. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Volkswagen Crafter 2.5 TDIFlash2,048.00 KB€15Add to cart
Volkswagen CrafterFlash2,048.00 KB€15Add to cart
Volkswagen CrafterFlash2,048.00 KB€15Add to cart
Volkswagen CrafterFlash2,048.00 KB€15Add to cart
Volkswagen CrafterFlash2,048.00 KB€15Add to cart
Volkswagen CrafterFlash4,096.00 KB€15Add to cart
Volkswagen CrafterFlash2,048.00 KB€15Add to cart
Volkswagen CrafterFlash2,048.00 KB€15Add to cart
Volkswagen CrafterFlash2,048.00 KB€15Add to cart
Volkswagen Crafter 2.5 TDIFlash2,048.00 KB€15Add to cart
Volkswagen CrafterFlash2,048.00 KB€15Add to cart
Volkswagen CrafterFlash2,048.00 KB€15Add to cart

All reads of 076906022G / 1037510918

Other pairs of Bosch EDC17CP20

HardwareSoftwareVehicles
076906022G1037506154Volkswagen Crafter, Volkswagen Crafter 2.5 TDI
076906022G1037510915Volkswagen Crafter, Volkswagen Crafter 2.5 TDI, Volkswagen Crafter CR 2011 Turbo
076906022G1037510916Volkswagen Crafter, Volkswagen Crafter 2.5 TDI, Volkswagen Crafter CR 2011 Turbo
076906022G1037510917Volkswagen Crafter, Volkswagen Crafter 2.5 R5 TDI CR, Volkswagen Transporter
076906022G1037510920Volkswagen Crafter, Volkswagen Crafter 2.5 TDI
076906022G1037517516Volkswagen Crafter
076906022G1037517517Volkswagen Crafter
076906022G1037517519Volkswagen Crafter, Volkswagen Crafter 2.5 TDI

Bosch EDC17CP20 original files

The Bosch EDC17CP20 unit page