Original file

Volkswagen Crafter Bosch EDC17CP20 076906022G / 10SW069781

An original (stock) flash read of the Bosch EDC17CP20 control unit, fitted in Volkswagen Crafter, hardware number 076906022G and software number 10SW069781, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Crafter2.5 diesel 108PS
Control unit
Bosch EDC17CP20
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
076906022G
Software number
10SW069781

Technical data

Vehicle
BrandVolkswagen
Car modelCrafter
Engine2.5 diesel 108PS
Power108.8PS / 80.0kW
Control unit
Control unitBosch EDC17CP20
ECU makerBosch
Hardware number076906022G
Software number10SW069781
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key498d19f6895d9647
Identification read from the file
ECU nameEDC17CP20
Read typeOBD read (no boot area)
Bosch part / software10SW069781Offset in the file: 0x04001A
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FB66
Bosch project identifier (EPK)35/1/EDC17_CP20/3/P672//C672R4KG///Offset in the file: 0x05B48C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP20 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 076906022G and software number 10SW069781. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP20

HardwareSoftwareVehicles
076906022G10SW069775Volkswagen Crafter
076906022G10SW069776Volkswagen Crafter
076906022G10SW069778Volkswagen Crafter, Volkswagen A3, Audi
076906022G10SW069779Volkswagen Crafter
076906022G10SW084676Volkswagen Crafter
076906022G10SW084697Volkswagen Crafter
076906022G10SW084699Volkswagen Crafter
076906022G10SW084715Volkswagen Crafter

Bosch EDC17CP20 original files

The Bosch EDC17CP20 unit page