Original file

Audi A8 Bosch EDC17CP24 4H0907409 / 4H0907409

An original (stock) flash read of the Bosch EDC17CP24 control unit, fitted in Audi A8, hardware number 4H0907409 and software number 4H0907409, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A84.2 diesel · 350.8PS / 258.0kW
Control unit
Bosch EDC17CP24
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
4H0907409
Software number
4H0907409
Bosch part / software
10SW055609
Software / calibration
4H0997409

Technical data

Vehicle
BrandAudi
Car modelA8
Engine4.2 diesel
Power350.8PS / 258.0kW
Control unit
Control unitBosch EDC17CP24
ECU makerBosch
Hardware number4H0907409
Software number4H0907409
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key5efe8b570a1c17d2
Identification read from the file
ECU nameEDC17CP24
Read typeCalibration only (data set)
Bosch part / software10SW055609Offset in the file: 0x18301A
Vehicle maker's hardware number4H0907409Offset in the file: 0x1BFFB8
Software / calibration4H0997409 · version 0002Offset in the file: 0x1BFFD2
Bosch project identifier (EPK)35/1/EDC17_CP24/5/P793//C793D4FX///Offset in the file: 0x183A14

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP24 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4H0907409 and software number 4H0907409. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP24

HardwareSoftwareVehicles
4H09074091037509972Audi A8, Audi pcmflash
4H09074091037511925Audi A8, Audi A8 4.2TDI, Audi A8 4.2 TDI
4H09074091037514636Audi A8 CR 2012 Turbo, Audi A8
4H090740910SW055609Audi A8
4H0907409A1037511926Audi A8 4.2 TDI
4H0907409D1037514636Audi A8, Audi A8 4.2 TDI CR DPF V8 Quattro, Audi A8 4.2 TDI CR V8
4H0907409E1037514637Audi A8 4.2 TDI
4H0907409F1037518086Audi A8 4.2 TDI Quattro - 350hp

Bosch EDC17CP24 original files

The Bosch EDC17CP24 unit page