Original file

Audi A8 4.2 TDI Bosch EDC17CP24 4H0907409E / 1037514637

An original (stock) flash read of the Bosch EDC17CP24 control unit, fitted in Audi A8 4.2 TDI, hardware number 4H0907409E and software number 1037514637, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A8 4.2 TDI4.2 diesel 350.8PS / 258.0kW
Control unit
Bosch EDC17CP24
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
4H0907409E
Software number
1037514637
Vehicle maker's hardware number
4H0907409

Technical data

Vehicle
BrandAudi
Car modelA8 4.2 TDI
Engine4.2 diesel 350.8PS / 258.0kW
Control unit
Control unitBosch EDC17CP24
ECU makerBosch
Hardware number4H0907409E
Software number1037514637
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key5fcaadf1eb0d95fe
Identification read from the file
ECU nameEDC17CP24
Read typeFull read (boot area included)
Bosch part / software1037514637Offset in the file: 0x02001A
Vehicle maker's hardware number4H0907409Offset in the file: 0x1BD0A8
Software / calibration4H0907409E · version 0002Offset in the file: 0x1BD0C2
Bosch project identifier (EPK)35/1/EDC17_CP24/5/P793//C793D4FQ///Offset in the file: 0x044C10

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP24 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4H0907409E and software number 1037514637. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP24

HardwareSoftwareVehicles
4H090740910SW055609Audi A8
4H09074094H0907409Audi A8
4H0907409A1037511926Audi A8 4.2 TDI
4H0907409D1037514636Audi A8, Audi A8 4.2 TDI CR DPF V8 Quattro, Audi A8 4.2 TDI CR V8
4H0907409F1037518086Audi A8 4.2 TDI Quattro - 350hp
4H0907409L1037522802Audi A8 4.2 TDI
4H0907409M1037522804Audi A8, Audi A8 4.2 TDI, Audi A8 4.2 TDI CR
4H0907409Q1037531614Audi A8

Bosch EDC17CP24 original files

The Bosch EDC17CP24 unit page