Original file

Jeep Wrangler Bosch EDC17CP27 0281016893 / 1037508709

An original (stock) flash read of the Bosch EDC17CP27 control unit, fitted in Jeep Wrangler, hardware number 0281016893 and software number 1037508709, 2,176.02 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Jeep Wrangler2.8 diesel 200PS
Control unit
Bosch EDC17CP27
Read type
OBD read (no boot area)
File
2,176.02 KB · Flash
Hardware number
0281016893
Software number
1037508709
Bosch part / software
1037519628
Vehicle maker's hardware number
55543210
Software / calibration
P_853_54G0__CV112900

Technical data

Vehicle
BrandJeep
Car modelWrangler
Engine2.8 diesel 200PS
Power200.0PS / 147.1kW
Control unit
Control unitBosch EDC17CP27
ECU makerBosch
Hardware number0281016893
Software number1037508709
File
File typeOriginal flash read
File size2,176.02 KB (2,228,240 bytes)
File key782aed74cf24455d
Identification read from the file
ECU nameEDC17CP27
Read typeOBD read (no boot area)
ProcessorTC1796
Bosch part / software1037519628Offset in the file: 0x02001A
Vehicle maker's hardware number55543210Offset in the file: 0x036B1E
Software / calibrationP_853_54G0__CV112900Offset in the file: 0x036CBC
Bosch project identifier (EPK)49/1/EDC17_CP27/53/P_853//P_853_54G0__CV112900///Offset in the file: 0x036CBC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP27 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281016893 and software number 1037508709. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Chrysler Jeep WranglerFlash2,048.00 KB€15Add to cart
Chrysler Voyager 178 BHPFlash · From the file name: Chrysler Voyager 2.8 CRD 1782,048.00 KB€15Add to cart

All reads of 0281016893 / 1037508709

Other pairs of Bosch EDC17CP27

HardwareSoftwareVehicles
1037538471Chrysler Jeep Wrangler
1037538473Jeep Wrangler
1037541308Jeep Wrangler, Jeep Grand Cherokee
1037541312Jeep Wrangler
02810168931037511147Chrysler Jeep Wrangler
02810168931037513129Chrysler Jeep
02810168931037519627Jeep Wrangler
02810168931037527434Jeep Wrangler

Bosch EDC17CP27 original files

The Bosch EDC17CP27 unit page