Original file

Chrysler Jeep Bosch EDC17CP27 0281016893 / 1037513129

An original (stock) flash read of the Bosch EDC17CP27 control unit, fitted in Chrysler Jeep, hardware number 0281016893 and software number 1037513129, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Chrysler Jeep2.0 diesel · 199.9PS / 147.0kW
Control unit
Bosch EDC17CP27
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
0281016893
Software number
1037513129
Software / calibration
P_853_52G1__CV103900

Technical data

Vehicle
BrandChrysler
Car modelJeep
Engine2.0 diesel
Power199.9PS / 147.0kW
Control unit
Control unitBosch EDC17CP27
ECU makerBosch
Hardware number0281016893
Software number1037513129
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyd4c573644209c3e4
Identification read from the file
ECU nameEDC17CP27
Read typeCalibration only (data set)
Bosch part / software1037513129Offset in the file: 0x18001A
Software / calibrationP_853_52G1__CV103900Offset in the file: 0x1806D8
Bosch project identifier (EPK)49/1/EDC17_CP27/53/P_853//P_853_52G1__CV103900///Offset in the file: 0x1806D8

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP27 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281016893 and software number 1037513129. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP27

HardwareSoftwareVehicles
1037541308Jeep Wrangler, Jeep Grand Cherokee
1037541312Jeep Wrangler
02810168931037508709Chrysler Wrangler, Chrysler Jeep Wrangler, Chrysler Voyager 178 BHP
02810168931037511147Chrysler Jeep Wrangler
02810168931037519627Jeep Wrangler
02810168931037527434Jeep Wrangler
02810168931037527439Jeep Wrangler
02810168931037538473Jeep Wrangler

Bosch EDC17CP27 original files

The Bosch EDC17CP27 unit page