Original file

Chrysler Voyager Bosch EDC17CP27 68226594AA / 1037538468

An original (stock) flash read of the Bosch EDC17CP27 control unit, fitted in Chrysler Voyager, hardware number 68226594AA and software number 1037538468, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Chrysler Voyager2.8 diesel · 177.0PS / 130.2kW
Control unit
Bosch EDC17CP27
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
68226594AA
Software number
1037538468
Software / calibration
P_853_57G0__CV132600

Technical data

Vehicle
BrandChrysler
Car modelVoyager
Engine2.8 diesel
Power177.0PS / 130.2kW
Control unit
Control unitBosch EDC17CP27
ECU makerBosch
Hardware number68226594AA
Software number1037538468
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keycfc8cd41fd669323
Identification read from the file
ECU nameEDC17CP27
Read typeCalibration only (data set)
Bosch part / software1037538468Offset in the file: 0x18001A
Software / calibrationP_853_57G0__CV132600Offset in the file: 0x1806D8
Bosch project identifier (EPK)49/1/EDC17_CP27/53/P_853//P_853_57G0__CV132600///Offset in the file: 0x1806D8

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP27 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 68226594AA and software number 1037538468. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP27

HardwareSoftwareVehicles
68140162AB1037519628Jeep Wrangler
68140163AE1037527439Jeep Wrangler
68144230AA1037508709Jeep Wrangler, Jeep Wrangler, Chrysler
68144230AA1037519628Jeep Wrangler
68226594AB1037508709Lancia Voyager
68226594AB1037541335Chrysler Voyager
68226604AB1037508709Jeep Wrangler
68226604AB1037541307Jeep Wrangler

Bosch EDC17CP27 original files

The Bosch EDC17CP27 unit page