Original file

Jeep Wrangler Bosch EDC17CP27 MAJ1VD53G1XX033 / 1037508709

An original (stock) flash read of the Bosch EDC17CP27 control unit, fitted in Jeep Wrangler, hardware number MAJ1VD53G1XX033 and software number 1037508709, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Jeep Wrangler2.8 diesel · 200.0PS / 147.1kW
Control unit
Bosch EDC17CP27
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
MAJ1VD53G1XX033
Software number
1037508709
Bosch part / software
1037513427
Vehicle maker's hardware number
55543210
Software / calibration
P_853_53G1__CV112000

Technical data

Vehicle
BrandJeep
Car modelWrangler
Engine2.8 diesel
Power200.0PS / 147.1kW
Control unit
Control unitBosch EDC17CP27
ECU makerBosch
Hardware numberMAJ1VD53G1XX033
Software number1037508709
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key13b3020e416f104a
Identification read from the file
ECU nameEDC17CP27
Read typeOBD read (no boot area)
ProcessorTC1796
Bosch part / software1037513427Offset in the file: 0x02001A
Vehicle maker's hardware number55543210Offset in the file: 0x036B1E
Software / calibrationP_853_53G1__CV112000Offset in the file: 0x036CBC
Bosch project identifier (EPK)49/1/EDC17_CP27/53/P_853//P_853_53G1__CV112000///Offset in the file: 0x036CBC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP27 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number MAJ1VD53G1XX033 and software number 1037508709. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP27

HardwareSoftwareVehicles
68226594AB1037508709Lancia Voyager
68226594AB1037541335Chrysler Voyager
68226604AB1037508709Jeep Wrangler
68226604AB1037541307Jeep Wrangler
MAJ4VC54G0XX0631037508709Jeep Wrangler, Jeep Wrangler, Chrysler
MAR2VD54G0XX02L1037508709Chrysler Voyager Turbo Diesel 119.9KWKW
MAR2VD54G0XX04L1037508709Lancia Voyager
MAR4JD57G1XX03H1037508709Lancia Voyager

Bosch EDC17CP27 original files

The Bosch EDC17CP27 unit page