Original file

Chrysler JEEP WRANGLER Bosch EDC17CP27 MMJ2VD54G0XX013 / 1037508709

An original (stock) flash read of the Bosch EDC17CP27 control unit, fitted in Chrysler JEEP WRANGLER, hardware number MMJ2VD54G0XX013 and software number 1037508709, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Chrysler JEEP WRANGLER2.8 197PS
Control unit
Bosch EDC17CP27
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
MMJ2VD54G0XX013
Software number
1037508709
Bosch part / software
1037519628
Vehicle maker's hardware number
55543210
Software / calibration
P_853_54G0__CV112900

Technical data

Vehicle
BrandChrysler
Car modelJEEP WRANGLER
Engine2.8 197PS
FuelDiesel
Control unit
Control unitBosch EDC17CP27
ECU makerBosch
Hardware numberMMJ2VD54G0XX013
Software number1037508709
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key2def60bfe35a1631
Identification read from the file
ECU nameEDC17CP27
Read typeOBD read (no boot area)
ProcessorTC1796
Bosch part / software1037519628Offset in the file: 0x02001A
Vehicle maker's hardware number55543210Offset in the file: 0x036B1E
Software / calibrationP_853_54G0__CV112900Offset in the file: 0x036CBC
Bosch project identifier (EPK)49/1/EDC17_CP27/53/P_853//P_853_54G0__CV112900///Offset in the file: 0x036CBC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP27 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number MMJ2VD54G0XX013 and software number 1037508709. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP27

HardwareSoftwareVehicles
MAJ1VD53G1XX0331037508709Jeep Wrangler
MAJ4VC54G0XX0631037508709Jeep Wrangler, Jeep Wrangler, Chrysler
MAR2VD54G0XX02L1037508709Chrysler Voyager Turbo Diesel 119.9KWKW
MAR2VD54G0XX04L1037508709Lancia Voyager
MAR4JD57G1XX03H1037508709Lancia Voyager
MMJ1VD54G0XX0431037508709Chrysler Jeep Wrangler
MMJ1VD54G0XX0471037508709Chrysler Jeep Wrangler
MMJ1VD54G0XX0531037508709Chrysler Jeep Wrangler

Bosch EDC17CP27 original files

The Bosch EDC17CP27 unit page