Original file

Land Rover Freelander Bosch EDC17CP42 0281017917 / 1037508786

An original (stock) flash read of the Bosch EDC17CP42 control unit, fitted in Land Rover Freelander, hardware number 0281017917 and software number 1037508786, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Land Rover Freelander
Control unit
Bosch EDC17CP42
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
0281017917
Software number
1037508786
Software / calibration
AG91-12B684-PA

Technical data

Vehicle
BrandLand Rover
Car modelFreelander
Control unit
Control unitBosch EDC17CP42
ECU makerBosch
Hardware number0281017917
Software number1037508786
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
From the file nameLand Rover Freelander EDC17CP42
File key0499c97d66d25f26
Identification read from the file
ECU nameEDC17CP42
Read typeOBD read (no boot area)
ProcessorTC1797
Bosch part / software1037508786Offset in the file: 0x02001A
Software / calibrationAG91-12B684-PAOffset in the file: 0x00FD00
Engine descriptionBH52-14C204-VCOffset in the file: 0x1BFF02
Bosch project identifier (EPK)42/1/EDC17_CP42/57/P785_LR//P785E50E_LR///Offset in the file: 0x031FFC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP42 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281017917 and software number 1037508786. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP42

HardwareSoftwareVehicles
02810166351037503103Renault Megane III
02810166351037512109Peugeot 508
02810166351037513953Peugeot 508
02810166351037515707Peugeot 508 FAP 2011 Turbo
02810180461037517068Peugeot 508
02810180461037518217Peugeot 508 SW
02810185821037523540Ford Galaxy 2.2L
02810195281037530725Ford S Max 2.2L

Bosch EDC17CP42 original files

The Bosch EDC17CP42 unit page