Original file

Ford Galaxy 2.2L Bosch EDC17CP42 0281018582 / 1037523540

An original (stock) flash read of the Bosch EDC17CP42 control unit, fitted in Ford Galaxy 2.2L, hardware number 0281018582 and software number 1037523540, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford Galaxy 2.2L2.2
Control unit
Bosch EDC17CP42
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
0281018582
Software number
1037523540
Vehicle maker's hardware number
AG91-12A650-RJ
Software / calibration
AG91-12B684-PA

Technical data

Vehicle
BrandFord
Car modelGalaxy 2.2L
Engine2.2
Control unit
Control unitBosch EDC17CP42
ECU makerBosch
Hardware number0281018582
Software number1037523540
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
From the file nameFord Galaxy EDC17CP42 RN
File keyb2a5576b04ec9a4c
Identification read from the file
ECU nameEDC17CP42
Read typeOBD read (no boot area)
ProcessorTC1797
Bosch part / software1037523540Offset in the file: 0x02001A
Vehicle maker's hardware numberAG91-12A650-RJOffset in the file: 0x00FD30
Software / calibrationAG91-12B684-PAOffset in the file: 0x00FD00
Bosch project identifier (EPK)42/1/EDC17_CP42/57/P785_CD//P785E81A_CD///Offset in the file: 0x0359C0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP42 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281018582 and software number 1037523540. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP42

HardwareSoftwareVehicles
02810166351037515707Peugeot 508 FAP 2011 Turbo
02810179171037508786Land Rover Freelander
02810180461037517068Peugeot 508
02810180461037518217Peugeot 508 SW
02810195281037530725Ford S Max 2.2L
02810198231037539440Peugeot 508
07001700056231F1037512109Citroën C5
07001700091037517068Peugeot 508

Bosch EDC17CP42 original files

The Bosch EDC17CP42 unit page