Original file
Peugeot 508 Bosch EDC17CP42 790_TC54 / 1037518217
An original (stock) flash read of the Bosch EDC17CP42 control unit, fitted in Peugeot 508, hardware number 790_TC54 and software number 1037518217, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Peugeot 5082.2 diesel · 204.0PS / 150.0kW
- Control unit
- Bosch EDC17CP42
- Read type
- Calibration only (data set)
- File
- 2,048.00 KB · Flash
- Hardware number
- 790_TC54
- Software number
- 1037518217
- Software / calibration
- P_790_TC54
Technical data
| Brand | Peugeot |
|---|---|
| Car model | 508 |
| Engine | 2.2 diesel |
| Power | 204.0PS / 150.0kW |
| Control unit | Bosch EDC17CP42 |
|---|---|
| ECU maker | Bosch |
| Hardware number | 790_TC54 |
| Software number | 1037518217 |
| File type | Original flash read |
|---|---|
| File size | 2,048.00 KB (2,097,152 bytes) |
| File key | fc3648a96100f4af |
| ECU name | EDC17CP42 | |
|---|---|---|
| Read type | Calibration only (data set) | |
| Bosch part / software | 1037518217 | Offset in the file: 0x10001A |
| Software / calibration | P_790_TC54 | Offset in the file: 0x100A10 |
| Bosch project identifier (EPK) | 40/1/EDC17_CP42/126/P_790//P_790_TC54/// | Offset in the file: 0x100A10 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch EDC17CP42 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number 790_TC54 and software number 1037518217. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch EDC17CP42
| Hardware | Software | Vehicles |
|---|---|---|
| 0281019528 | 1037530725 | Ford S Max 2.2L |
| 0281019823 | 1037539440 | Peugeot 508 |
| 07001700056231F | 1037512109 | Citroën C5 |
| 0700170009 | 1037517068 | Peugeot 508 |
| 9667194080 | 1037515707 | Peugeot 508 |
| AG91-12A650-PA | 1130791706 | Ford |
| AG91-12A650-PA | 1934036162 | Ford Ranger |
| AG91-12A650-PE | 1037530714 | Ford S AMX 2.2TDCI |