Original file
Ford S Max Bosch EDC17CP42 AG91-12A650-RP / 1037511366
An original (stock) flash read of the Bosch EDC17CP42 control unit, fitted in Ford S Max, hardware number AG91-12A650-RP and software number 1037511366, 4,160.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Ford S Max2.2 diesel
- Control unit
- Bosch EDC17CP42
- Read type
- OBD read (no boot area)
- File
- 4,160.00 KB · Flash
- Hardware number
- AG91-12A650-RP
- Software number
- 1037511366
- Bosch part / software
- 1037530713
- Vehicle maker's hardware number
- AG91-12A650-TK
- Software / calibration
- AG91-12B684-PA
Technical data
| Brand | Ford |
|---|---|
| Car model | S Max |
| Engine | 2.2 diesel |
| Control unit | Bosch EDC17CP42 |
|---|---|
| ECU maker | Bosch |
| Hardware number | AG91-12A650-RP |
| Software number | 1037511366 |
| File type | Original flash read |
|---|---|
| File size | 4,160.00 KB (4,259,840 bytes) |
| From the file name | Ford Max 2.2 Tdci EDC17CP42 |
| File key | 2d71c43adba23742 |
| ECU name | EDC17CP42 | |
|---|---|---|
| Read type | OBD read (no boot area) | |
| Processor | TC1797 | |
| Bosch part / software | 1037530713 | Offset in the file: 0x02001A |
| Vehicle maker's hardware number | AG91-12A650-TK | Offset in the file: 0x00FD30 |
| Software / calibration | AG91-12B684-PA | Offset in the file: 0x00FD00 |
| Bosch project identifier (EPK) | 42/1/EDC17_CP42/57/P785_CD//P785E82A_CD/// | Offset in the file: 0x0359F0 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch EDC17CP42 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number AG91-12A650-RP and software number 1037511366. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch EDC17CP42
| Hardware | Software | Vehicles |
|---|---|---|
| AG91-12A650-PE | 1037530714 | Ford S AMX 2.2TDCI |
| AG91-12A650-PP | 1037513491 | Ford S-Max 2.2 TDCi, Ford Mondeo, Ford S-Max |
| AG91-12A650-RH | 1037523540 | Ford Galaxy |
| AG91-12A650-RK | 1037513489 | Ford S-Max, Ford Galaxy, Ford Galaxy 200 BHP |
| AG91-12A650-TF | 1037511366 | Ford Mondeo |
| AG91-12A650-TG | 1037513153 | Ford Mondeo |
| AG91-12A650-TG | 1037513177 | Ford Mondeo |
| AG91-12A650-TG | 1037519989 | Ford Mondeo 2 |