Original file

Ford Mondeo 2 Bosch EDC17CP42 AG91-12A650-TG / 1037519989

An original (stock) flash read of the Bosch EDC17CP42 control unit, fitted in Ford Mondeo 2, hardware number AG91-12A650-TG and software number 1037519989, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford Mondeo 2
Control unit
Bosch EDC17CP42
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
AG91-12A650-TG
Software number
1037519989
Vehicle maker's hardware number
CG91-12A650-JB
Software / calibration
AG91-12B684-PB

Technical data

Vehicle
BrandFord
Car modelMondeo 2
Control unit
Control unitBosch EDC17CP42
ECU makerBosch
Hardware numberAG91-12A650-TG
Software number1037519989
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
From the file nameFord Mondeo EDC17CP42 TG
File key489731fd1c3f451b
Identification read from the file
ECU nameEDC17CP42
Read typeOBD read (no boot area)
ProcessorTC1797
Bosch part / software1037519989Offset in the file: 0x02001A
Vehicle maker's hardware numberCG91-12A650-JBOffset in the file: 0x00FD30
Software / calibrationAG91-12B684-PBOffset in the file: 0x00FD00
Bosch project identifier (EPK)42/1/EDC17_CP42/57/P785_CD//P785E81A_CD///Offset in the file: 0x0359C0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP42 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number AG91-12A650-TG and software number 1037519989. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP42

HardwareSoftwareVehicles
AG91-12A650-RP1037511366Ford S Max
AG91-12A650-TF1037511366Ford Mondeo
AG91-12A650-TG1037513153Ford Mondeo
AG91-12A650-TG1037513177Ford Mondeo
AG91-12A650-TP1037513490Ford Mondeo
AG91-12A650-UJ1037513279Ford Mondeo
AG91-12B684-PALand Rover Freelander
AG91-12B684-PA1037508786Land Rover Freelander, Land Rover Freelander II TD4, Land Rover Freelander II

Bosch EDC17CP42 original files

The Bosch EDC17CP42 unit page