Original file

Ford Mondeo Bosch EDC17CP42 AG91-12K532-TB08 / 1879756083

An original (stock) flash read of the Bosch EDC17CP42 control unit, fitted in Ford Mondeo, hardware number AG91-12K532-TB08 and software number 1879756083, 2,880.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford Mondeo2.2 diesel 200PS
Control unit
Bosch EDC17CP42
Read type
Full read (boot area included)
File
2,880.00 KB · Flash
Hardware number
AG91-12K532-TB08
Software number
1879756083
Vehicle maker's hardware number
AG91-12A650-TB

Technical data

Vehicle
BrandFord
Car modelMondeo
Engine2.2 diesel 200PS
Power200.0PS / 147.1kW
Control unit
Control unitBosch EDC17CP42
ECU makerBosch
Hardware numberAG91-12K532-TB08
Software number1879756083
File
File typeOriginal flash read
File size2,880.00 KB (2,949,120 bytes)
From the file nameFord Mondeo 2.2 TDCI Bosch
File key739272a647f0de70
Identification read from the file
ECU nameEDC17CP42
Read typeFull read (boot area included)
ProcessorTC1797
Vehicle maker's hardware numberAG91-12A650-TBOffset in the file: 0x27B3C5
Bosch project identifier (EPK)42/1/EDC17_CP42/57/P785_CD//P785E60A_CD///Offset in the file: 0x030DB4

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP42 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number AG91-12K532-TB08 and software number 1879756083. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP42

HardwareSoftwareVehicles
AG91-12K532-RP1037513154Ford Mondeo
AG91-12K532-RP1037513175Ford S-Max
AG91-12K532-RP1037523303Ford S-Max
AG91-12K532-RP1037530713Ford S-Max, Ford Galaxy
AG91-12K532-TK1037511081Ford Mondeo
AG91-12K532-TK1037511366Ford Mondeo, Ford Mondeo 2004 Turbo Diesel
AG91-12K532-TL1037511081Ford Mondeo
AG91-12K532-TL1037513142Ford Mondeo

Bosch EDC17CP42 original files

The Bosch EDC17CP42 unit page