Original file

Ford S-Max Bosch EDC17CP42 CG91-12K532-GC / 1037519988

An original (stock) flash read of the Bosch EDC17CP42 control unit, fitted in Ford S-Max, hardware number CG91-12K532-GC and software number 1037519988, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford S-Max2.2 diesel 199PS
Control unit
Bosch EDC17CP42
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
CG91-12K532-GC
Software number
1037519988
Bosch part / software
1037530723
Vehicle maker's hardware number
CG91-12A650-GB
Software / calibration
AG91-12B684-PB

Technical data

Vehicle
BrandFord
Car modelS-Max
Engine2.2 diesel 199PS
Power199.2PS / 146.5kW
Control unit
Control unitBosch EDC17CP42
ECU makerBosch
Hardware numberCG91-12K532-GC
Software number1037519988
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key4dd736d82c0c857e
Identification read from the file
ECU nameEDC17CP42
Read typeOBD read (no boot area)
ProcessorTC1797
Bosch part / software1037530723Offset in the file: 0x02001A
Vehicle maker's hardware numberCG91-12A650-GBOffset in the file: 0x00FD30
Software / calibrationAG91-12B684-PBOffset in the file: 0x00FD00
Bosch project identifier (EPK)42/1/EDC17_CP42/57/P785_CD//P785E82A_CD///Offset in the file: 0x0359F0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP42 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CG91-12K532-GC and software number 1037519988. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Ford S-MaxFlash4,096.00 KB€15Add to cart

All reads of CG91-12K532-GC / 1037519988

Other pairs of Bosch EDC17CP42

HardwareSoftwareVehicles
CG91-12A650-JB1037519989Ford Mondeo
CG91-12A650-JC1037530724Ford Mondeo, Ford Mondeo 200 BHP, Ford S-Max
CG91-12A650-KC1037523539Ford Galaxy, Ford Mondeo 2.2L
CG91-12K532-GB1037519988Ford S-Max
CG91-12K532-GC1037530723Ford S-Max, Ford Galaxy
CG91-12K532-HB1037523300Ford S Max
CG91-12K532-HC1037523538Ford S-Max, Ford Galaxy
CG91-12K532-HD1037523538Ford S-Max

Bosch EDC17CP42 original files

The Bosch EDC17CP42 unit page