Original file

Ford S Max Bosch EDC17CP42 CG91-12K532-HB / 1037523300

An original (stock) flash read of the Bosch EDC17CP42 control unit, fitted in Ford S Max, hardware number CG91-12K532-HB and software number 1037523300, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Ford S Max2.2 diesel
Control unit
Bosch EDC17CP42
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
CG91-12K532-HB
Software number
1037523300
Vehicle maker's hardware number
CG91-12A650-HB
Software / calibration
AG91-12B684-PB

Technical data

Vehicle
BrandFord
Car modelS Max
Engine2.2 diesel
Control unit
Control unitBosch EDC17CP42
ECU makerBosch
Hardware numberCG91-12K532-HB
Software number1037523300
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
From the file nameFord Max 2.2 TDCi EDC17CP42
File key2f2922042ac449d4
Identification read from the file
ECU nameEDC17CP42
Read typeOBD read (no boot area)
ProcessorTC1797
Bosch part / software1037523300Offset in the file: 0x02001A
Vehicle maker's hardware numberCG91-12A650-HBOffset in the file: 0x00FD30
Software / calibrationAG91-12B684-PBOffset in the file: 0x00FD00
Bosch project identifier (EPK)42/1/EDC17_CP42/57/P785_CD//P785E81A_CD///Offset in the file: 0x0359C0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP42 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number CG91-12K532-HB and software number 1037523300. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP42

HardwareSoftwareVehicles
CG91-12A650-KC1037523539Ford Galaxy, Ford Mondeo 2.2L
CG91-12K532-GB1037519988Ford S-Max
CG91-12K532-GC1037519988Ford S-Max
CG91-12K532-GC1037530723Ford S-Max, Ford Galaxy
CG91-12K532-HC1037523538Ford S-Max, Ford Galaxy
CG91-12K532-HD1037523538Ford S-Max
CG91-12K532-HD1037530725Ford S-Max, Ford Galaxy
CG91-12K532-JB1037519989Ford Mondeo

Bosch EDC17CP42 original files

The Bosch EDC17CP42 unit page