Original file

Land Rover Range Rover Evoque Bosch EDC17CP42 EJ32-12K532-VSD / 1037534642

An original (stock) flash read of the Bosch EDC17CP42 control unit, fitted in Land Rover Range Rover Evoque, hardware number EJ32-12K532-VSD and software number 1037534642, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Land Rover Range Rover Evoque2.2 diesel 150PS
Control unit
Bosch EDC17CP42
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
EJ32-12K532-VSD
Software number
1037534642
Software / calibration
EJ32-14C204-VC

Technical data

Vehicle
BrandLand Rover
Car modelRange Rover Evoque
Engine2.2 diesel 150PS
Power150.0PS / 110.3kW
Control unit
Control unitBosch EDC17CP42
ECU makerBosch
Hardware numberEJ32-12K532-VSD
Software number1037534642
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key5e0c2f21352d6258
Identification read from the file
ECU nameEDC17CP42
Read typeCalibration only (data set)
Bosch part / software1037534642Offset in the file: 0x10001A
Software / calibrationEJ32-14C204-VCOffset in the file: 0x19ED0D
Bosch project identifier (EPK)37/1/EDC17_CP42/190/P963//P963F73c///Offset in the file: 0x100540

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP42 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number EJ32-12K532-VSD and software number 1037534642. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Land Rover EvoqueFlash4,096.00 KB€15Add to cart
Land Rover Range Rover EvoqueFlash1,024.00 KB€15Add to cart
Land Rover EvoqueFlash4,096.00 KB€15Add to cart
Land Rover EvoqueFlash4,096.00 KB€15Add to cart
Land Rover Range Rover Evoque 2.2 SD4Flash2,048.00 KB€15Add to cart
Land Rover Range Rover Evoque 2.2 TD4Flash4,096.00 KB€15Add to cart

All reads of EJ32-12K532-VSD / 1037534642

Other pairs of Bosch EDC17CP42

HardwareSoftwareVehicles
EJ32-12K532-VJD1037534642Land Rover Range Rover Evoque, Land Rover Range Rover
EJ32-12K532-VKE1037534642Land Rover Range Rover Evoque, Land Rover Range Rover Evoque 2.2 TD4
EJ32-12K532-VND1037534642Land Rover Range Rover Evoque, Land Rover Discovery
EJ32-12K532-VPE1037534642Land Rover Range Rover Evoque
EJ32-12K532-VSE1037534642Land Rover Range Rover Evoque, Land Rover Evoque, Rover
EJ32-12K532-VSF1037534642Land Rover Range Rover Evoque, Land Rover Range Rover
EJ32-12K532-VTD1037534642Land Rover Range Rover Evoque, Land Rover Range Rover Evoque 2.2 SD4, Land Rover Range Rover
EJ32-12K532-VTE1037534642Land Rover Range Rover Evoque, Land Rover Evoque

Bosch EDC17CP42 original files

The Bosch EDC17CP42 unit page