Original file
Volkswagen Touareg CR 2011 Turbo Bosch EDC17CP44 0281017733 / 1037518184
An original (stock) flash read of the Bosch EDC17CP44 control unit, fitted in Volkswagen Touareg CR 2011 Turbo, hardware number 0281017733 and software number 1037518184, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Volkswagen Touareg CR 2011 Turbo3.0 diesel · 245.0PS / 180.2kW
- Control unit
- Bosch EDC17CP44
- Read type
- Calibration only (data set)
- File
- 4,096.00 KB · Flash
- Hardware number
- 0281017733
- Software number
- 1037518184
- Vehicle maker's hardware number
- 4G0907401
- Software / calibration
- 7P0907401F
Technical data
| Brand | Volkswagen |
|---|---|
| Car model | Touareg CR 2011 Turbo |
| Engine | 3.0 diesel |
| Power | 245.0PS / 180.2kW |
| Control unit | Bosch EDC17CP44 |
|---|---|
| ECU maker | Bosch |
| Hardware number | 0281017733 |
| Software number | 1037518184 |
| File type | Original flash read |
|---|---|
| File size | 4,096.00 KB (4,194,304 bytes) |
| From the file name | VW Touareg 3.0 TDI CR |
| File key | e43de293e75e8ff4 |
| ECU name | EDC17CP44 | |
|---|---|---|
| Read type | Calibration only (data set) | |
| Bosch part / software | 1037518184 | Offset in the file: 0x34001A |
| Vehicle maker's hardware number | 4G0907401 | Offset in the file: 0x39AE3E |
| Software / calibration | 7P0907401F · version 0002 | Offset in the file: 0x39AE58 |
| Bosch project identifier (EPK) | 37/1/EDC17_CP44/5/P1071//C1071B0AB/// | Offset in the file: 0x340A14 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch EDC17CP44 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number 0281017733 and software number 1037518184. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch EDC17CP44
| Hardware | Software | Vehicles |
|---|---|---|
| 0281017727 | 1037518045 | Audi Q7 |
| 0281019937 | 1037556993 | Audi A7 3000CCM CGQB |
| 059907309 | 1037545481 | Audi Macan 3.0 TDI CR, Audi Macan |
| 059907309A | 011092 | Porsche A8 3.0 TDI, Porsche Macan S 3.0 TDI CR, Porsche Macan 3.0d |
| 059907309A | 030905 | Audi Macan 3.0 TDI |
| 059907309A | 034331 | Porsche Macan, Porsche Macan 3.0 V6 TDI S, Porsche A8 3.0 TDI |
| 059907309A | 059907309A | Audi A8, Audi Macan, Porsche |
| 059907309A | 1037534117 | Porsche Macan, Porsche Macan S, Porsche A8 |