Original file

Porsche Macan Bosch EDC17CP44 059907309A / 059907309A

An original (stock) flash read of the Bosch EDC17CP44 control unit, fitted in Porsche Macan, hardware number 059907309A and software number 059907309A, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Porsche Macan3.0 diesel · 210.7PS / 155.0kW
Control unit
Bosch EDC17CP44
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
059907309A
Software number
059907309A
Bosch part / software
10SW034331
Software / calibration
95B907401N

Technical data

Vehicle
BrandPorsche
Car modelMacan
Engine3.0 diesel
Power210.7PS / 155.0kW
Control unit
Control unitBosch EDC17CP44
ECU makerBosch
Hardware number059907309A
Software number059907309A
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyc7e55557dd7b0fbd
Identification read from the file
ECU nameEDC17CP44
Read typeFull read (boot area included)
Bosch part / software10SW034331Offset in the file: 0x28301A
Vehicle maker's hardware number059907309AOffset in the file: 0x324A34
Software / calibration95B907401N · version 0001Offset in the file: 0x324A4E
Bosch project identifier (EPK)37/1/EDC17_CP44/5/P1422//C1422CE90///Offset in the file: 0x284630

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP44 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 059907309A and software number 059907309A. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Audi A8Flash4,096.00 KB€15Add to cart

All reads of 059907309A / 059907309A

Other pairs of Bosch EDC17CP44

HardwareSoftwareVehicles
0599073091037545481Audi Macan 3.0 TDI CR, Audi Macan
059907309A011092Porsche A8 3.0 TDI, Porsche Macan S 3.0 TDI CR, Porsche Macan 3.0d
059907309A030905Audi Macan 3.0 TDI
059907309A034331Porsche Macan, Porsche Macan 3.0 V6 TDI S, Porsche A8 3.0 TDI
059907309A1037534117Porsche Macan, Porsche Macan S, Porsche A8
059907309A1037540682Porsche Macan S, Porsche Macan S 3.0 TDI CR, Porsche Macan 3.0 TDI CR
059907309A1037541946Porsche Macan S, Porsche Macan 3.0 TDI, Porsche Macan
059907309A1037545532Porsche Macan S, Porsche Macan S 3.0 TDI CR, Porsche Macan

Bosch EDC17CP44 original files

The Bosch EDC17CP44 unit page