Original file

Porsche Panamera 2012 KW Bosch EDC17CP44 298907401 / 1037521033

An original (stock) flash read of the Bosch EDC17CP44 control unit, fitted in Porsche Panamera 2012 KW, hardware number 298907401 and software number 1037521033, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Porsche Panamera 2012 KW3.0 · 245.0PS / 180.2kW
Control unit
Bosch EDC17CP44
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
298907401
Software number
1037521033
Software / calibration
298907401D

Technical data

Vehicle
BrandPorsche
Car modelPanamera 2012 KW
Engine3.0
FuelDiesel
Power245.0PS / 180.2kW
Control unit
Control unitBosch EDC17CP44
ECU makerBosch
Hardware number298907401
Software number1037521033
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file namePorsche Panamera 3.0 2012 KW
File key1e6729c4072d0f3b
Identification read from the file
ECU nameEDC17CP44
Read typeCalibration only (data set)
Bosch part / software1037521033Offset in the file: 0x14001A
Vehicle maker's hardware number298907401Offset in the file: 0x19AE3E
Software / calibration298907401D · version 0002Offset in the file: 0x19AE58
Bosch project identifier (EPK)37/1/EDC17_CP44/5/P1071//C1071B0AB///Offset in the file: 0x140A14

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP44 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 298907401 and software number 1037521033. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP44

HardwareSoftwareVehicles
059907309A10SW034331Porsche Macan, Porsche Macan S, Porsche Cayenne
059907309A95B907401GPorsche Macan
059907309A95B907401NPorsche Macan
2989074011037519319Porsche Panamera, Porsche Panamera Diesel, Porsche Panamera CR 2012 Turbo
2989074011037525538Porsche Panamera CR 2013 Turbo
298907401B1037519325Porsche Panamera Diesel, Porsche Panamera, Porsche Panamera 3.0 TDI
298907401B1037527027Porsche Panamera Diesel
298907401B1037536643Porsche Panamera Diesel

Bosch EDC17CP44 original files

The Bosch EDC17CP44 unit page