Original file

Porsche Panamera 4 3.6 V6 Bosch EDC17CP44 298907401F / 005438

An original (stock) flash read of the Bosch EDC17CP44 control unit, fitted in Porsche Panamera 4 3.6 V6, hardware number 298907401F and software number 005438, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Porsche Panamera 4 3.6 V63.6 diesel 299PS
Control unit
Bosch EDC17CP44
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
298907401F
Software number
005438
Bosch part / software
10SW005438
Vehicle maker's hardware number
298907401

Technical data

Vehicle
BrandPorsche
Car modelPanamera 4 3.6 V6
Engine3.6 diesel 299PS
Control unit
Control unitBosch EDC17CP44
ECU makerBosch
Hardware number298907401F
Software number005438
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyd8b99a6ba16c587d
Identification read from the file
ECU nameEDC17CP44
Read typeFull read (boot area included)
Bosch part / software10SW005438Offset in the file: 0x34001A
Vehicle maker's hardware number298907401Offset in the file: 0x39F2CA
Software / calibration298907401F · version 0004Offset in the file: 0x39F2E4
Bosch project identifier (EPK)37/1/EDC17_CP44/5/P1353//C1353C0L0///Offset in the file: 0x341630

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP44 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 298907401F and software number 005438. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP44

HardwareSoftwareVehicles
298907401D1037536642Porsche Panamera, Porsche Panamera Diesel, Porsche Cayenne Diesel 3.0 TDI
298907401E1037535301Porsche Panamera Diesel, Porsche Panamera, Porsche Panamera Diesel 3.0 V6
298907401E1037542293Porsche Panamera Diesel, Porsche Panamera
298907401E1037556951Porsche Panamera Diesel
298907401F1037540589Porsche Panamera Diesel 3.0 TDI CR, Porsche Panamera Diesel
298907401F1037544358Porsche Panamera Diesel, Porsche Panamera, Porsche Panamera Diesel 3.0 TDI CR
298907401G055205Porsche 970 3.0 TDI
298907401G1037519319Porsche Panamera 3.0 TDI

Bosch EDC17CP44 original files

The Bosch EDC17CP44 unit page