Original file

Porsche 970 Bosch EDC17CP44 298907401G / 298907401G

An original (stock) flash read of the Bosch EDC17CP44 control unit, fitted in Porsche 970, hardware number 298907401G and software number 298907401G, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Porsche 9703.0 diesel
Control unit
Bosch EDC17CP44
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
298907401G
Software number
298907401G
Bosch part / software
10SW055205
Vehicle maker's hardware number
298907401

Technical data

Vehicle
BrandPorsche
Car model970
Engine3.0 diesel
Control unit
Control unitBosch EDC17CP44
ECU makerBosch
Hardware number298907401G
Software number298907401G
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key13afea8bc1dbccd9
Identification read from the file
ECU nameEDC17CP44
Read typeFull read (boot area included)
Bosch part / software10SW055205Offset in the file: 0x34001A
Vehicle maker's hardware number298907401Offset in the file: 0x39C56A
Software / calibration298907401G · version 0003Offset in the file: 0x39C584
Bosch project identifier (EPK)37/1/EDC17_CP44/5/P1071//C1071B0CM///Offset in the file: 0x340A14

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP44 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 298907401G and software number 298907401G. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP44

HardwareSoftwareVehicles
298907401F1037544358Porsche Panamera Diesel, Porsche Panamera, Porsche Panamera Diesel 3.0 TDI CR
298907401G055205Porsche 970 3.0 TDI
298907401G1037519319Porsche Panamera 3.0 TDI
298907401G1037521033Porsche Panamera
298907401H1037540589Porsche Panamera Diesel 3.0 BiTDI
298907401H10SW054804Porsche Panamera Diesel
4G0907311B1037515241Audi A6, Audi A6 3.0 TDI (204) Quattro S-Tronic - 204hp
4G0907311B1037518172Audi A6, Audi A7, Audi A6 MARKIE 3.0 TDI

Bosch EDC17CP44 original files

The Bosch EDC17CP44 unit page