Original file

Audi A6 Bosch EDC17CP44 4G0907311B / 1037515241

An original (stock) flash read of the Bosch EDC17CP44 control unit, fitted in Audi A6, hardware number 4G0907311B and software number 1037515241, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A63.0 diesel 204PS
Control unit
Bosch EDC17CP44
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
4G0907311B
Software number
1037515241
Vehicle maker's hardware number
4G0907401

Technical data

Vehicle
BrandAudi
Car modelA6
Engine3.0 diesel 204PS
Power204.0PS / 150.0kW
Control unit
Control unitBosch EDC17CP44
ECU makerBosch
Hardware number4G0907311B
Software number1037515241
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyaf85ee8cf43b08d4
Identification read from the file
ECU nameEDC17CP44
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software1037515241Offset in the file: 0x02001A
Vehicle maker's hardware number4G0907401Offset in the file: 0x3991C4
Software / calibration4G0907311B · version 0001Offset in the file: 0x3991DE
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FE50
Bosch project identifier (EPK)37/1/EDC17_CP44/5/P1071//C1071C5W7///Offset in the file: 0x03FED4

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP44 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4G0907311B and software number 1037515241. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Audi A6Flash4,096.00 KB€15Add to cart
Audi A6Flash4,096.00 KB€15Add to cart
Audi A6Flash4,096.00 KB€15Add to cart
Audi A6 3.0 TDI (204) Quattro S-Tronic - 204hpFlash4,096.00 KB€15Add to cart

All reads of 4G0907311B / 1037515241

Other pairs of Bosch EDC17CP44

HardwareSoftwareVehicles
298907401G1037521033Porsche Panamera
298907401G298907401GPorsche 970
298907401H1037540589Porsche Panamera Diesel 3.0 BiTDI
298907401H10SW054804Porsche Panamera Diesel
4G0907311B1037518172Audi A6, Audi A7, Audi A6 MARKIE 3.0 TDI
4G0907311D1037518774Audi A6
4G0907311D1037521654Audi A6, Audi A6 3.0 TDI CR, Audi pcmflash
4G0907311D1037542215Audi A6, Audi pcmflash

Bosch EDC17CP44 original files

The Bosch EDC17CP44 unit page