Original file

Audi A6 Bosch EDC17CP44 4G0907311D / 1037544672

An original (stock) flash read of the Bosch EDC17CP44 control unit, fitted in Audi A6, hardware number 4G0907311D and software number 1037544672, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A63.0 diesel 204PS
Control unit
Bosch EDC17CP44
Read type
Calibration only (data set)
File
4,096.00 KB · Flash
Hardware number
4G0907311D
Software number
1037544672
Vehicle maker's hardware number
4G0907401

Technical data

Vehicle
BrandAudi
Car modelA6
Engine3.0 diesel 204PS
Power204.0PS / 150.0kW
Control unit
Control unitBosch EDC17CP44
ECU makerBosch
Hardware number4G0907311D
Software number1037544672
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key5acaa8298d3c5e76
Identification read from the file
ECU nameEDC17CP44
Read typeCalibration only (data set)
Bosch part / software1037544672Offset in the file: 0x34001A
Vehicle maker's hardware number4G0907401Offset in the file: 0x39AE3E
Software / calibration4G0907311D · version 0005Offset in the file: 0x39AE58
Bosch project identifier (EPK)37/1/EDC17_CP44/5/P1071//C1071B0AB///Offset in the file: 0x340A14

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP44 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4G0907311D and software number 1037544672. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Audi A6Flash4,096.00 KB€15Add to cart
Audi A6Flash4,096.00 KB€15Add to cart
Audi pcmflashFlash4,096.00 KB€15Add to cart

All reads of 4G0907311D / 1037544672

Other pairs of Bosch EDC17CP44

HardwareSoftwareVehicles
4G0907311B1037518172Audi A6, Audi A7, Audi A6 MARKIE 3.0 TDI
4G0907311D1037518774Audi A6
4G0907311D1037521654Audi A6, Audi A6 3.0 TDI CR, Audi pcmflash
4G0907311D1037542215Audi A6, Audi pcmflash
4G0907311D1037556950Audi pcmflash, Audi A6
4G0907311D1037561756Audi A6, Audi A6 3.0 TDI EU6 (FWD), Audi A6 3.0 TDI -
4G0907311E1037522832Audi A6, Audi A7, Audi A6 3.0 TDI CR
4G0907311E1037532819Audi A6, Audi A6 3.0 TDI CR DPF, Audi A7 3.0 TDI

Bosch EDC17CP44 original files

The Bosch EDC17CP44 unit page