Original file

Audi A4 3.0 TDI Bosch EDC17CP44 4G0907401 / 051062

An original (stock) flash read of the Bosch EDC17CP44 control unit, fitted in Audi A4 3.0 TDI, hardware number 4G0907401 and software number 051062, 8,192.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A4 3.0 TDI3.0 diesel 244.7PS / 180.0kW
Control unit
Bosch EDC17CP44
Read type
Full read (boot area included)
File
8,192.00 KB · Flash
Hardware number
4G0907401
Software number
051062
Bosch part / software
10SW051062
Software / calibration
8K5997401

Technical data

Vehicle
BrandAudi
Car modelA4 3.0 TDI
Engine3.0 diesel 244.7PS / 180.0kW
Control unit
Control unitBosch EDC17CP44
ECU makerBosch
Hardware number4G0907401
Software number051062
File
File typeOriginal flash read
File size8,192.00 KB (8,388,608 bytes)
File key997c78661bbff935
Identification read from the file
ECU nameEDC17CP44
Read typeFull read (boot area included)
Bosch part / software10SW051062Offset in the file: 0x34001A
Vehicle maker's hardware number4G0907401Offset in the file: 0x22F7F4
Software / calibration8K5997401 · version 0005Offset in the file: 0x22F80E
Bosch project identifier (EPK)37/1/EDC17_CP44/5/P1071//C1071B0CH///Offset in the file: 0x340A14

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP44 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4G0907401 and software number 051062. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP44

HardwareSoftwareVehicles
4G0907311G1037514662Audi A7, Audi A6 3.0 TDI CR DPF, Audi C7 3.0 TDI
4G0907311G1037515581Audi A7, Audi A6, Audi A5 3.0 TDI
4G0907311G1037518151Audi A6, Audi A6 3.0 TDI, Audi A6 3.0 TDI CR
4G0907401050945Audi A6 3.0 TDI, Audi A7 3.0 TDI
4G0907401051449Audi A5 3.0 TDI CR
4G0907401051956Audi A6 3.0 TDI CR, Audi A6 3.0 TDI CR DPF
4G09074011037505905Audi A7
4G09074011037509987Audi A7

Bosch EDC17CP44 original files

The Bosch EDC17CP44 unit page