Original file

Audi A8 Bosch EDC17CP44 4G0907401 / 1037511950

An original (stock) flash read of the Bosch EDC17CP44 control unit, fitted in Audi A8, hardware number 4G0907401 and software number 1037511950, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A83.0 diesel 250PS
Control unit
Bosch EDC17CP44
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
4G0907401
Software number
1037511950
Bosch part / software
10SW051172
Software / calibration
4H0997401

Technical data

Vehicle
BrandAudi
Car modelA8
Engine3.0 diesel 250PS
Power250.2PS / 184.0kW
Control unit
Control unitBosch EDC17CP44
ECU makerBosch
Hardware number4G0907401
Software number1037511950
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
From the file nameL533CC0
File key55fb63cfa22479f7
Identification read from the file
ECU nameEDC17CP44
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software10SW051172Offset in the file: 0x02001A
Vehicle maker's hardware number4G0907401Offset in the file: 0x39B6C0
Software / calibration4H0997401 · version 0004Offset in the file: 0x39B6DA
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FE50
Bosch project identifier (EPK)37/1/EDC17_CP44/5/P1071//C1071C5WC///Offset in the file: 0x03FFEC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP44 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4G0907401 and software number 1037511950. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Audi A8Flash4,096.00 KB€15Add to cart
Audi A8Flash4,096.00 KB€15Add to cart
Audi A8Flash4,096.00 KB€15Add to cart
Audi A8Flash2,048.00 KB€15Add to cart
Audi A8Flash4,096.00 KB€15Add to cart
Audi A8Flash4,096.00 KB€15Add to cart
Audi A8Flash4,096.00 KB€15Add to cart
Audi A8Flash4,096.00 KB€15Add to cart
Audi A8Flash4,096.00 KB€15Add to cart
Audi A8 3.0 TDIFlash4,096.00 KB€15Add to cart
Audi A8 3.0 TDIFlash4,096.00 KB€15Add to cart

All reads of 4G0907401 / 1037511950

Other pairs of Bosch EDC17CP44

HardwareSoftwareVehicles
4G0907401051956Audi A6 3.0 TDI CR, Audi A6 3.0 TDI CR DPF
4G09074011037505905Audi A7
4G09074011037509987Audi A7
4G09074011037510955Audi A8, Audi A8 3.0 TDI CR
4G09074011037511968Audi A7, Audi A7 3.0 TDI CR, Audi Q7
4G09074011037513666Audi A6
4G09074011037515241Audi A6 CR Turbo Diesel
4G09074011037515579Audi A6

Bosch EDC17CP44 original files

The Bosch EDC17CP44 unit page