Original file

Audi A6 CR Turbo Diesel Bosch EDC17CP44 4G0907401 / 1037515241

An original (stock) flash read of the Bosch EDC17CP44 control unit, fitted in Audi A6 CR Turbo Diesel, hardware number 4G0907401 and software number 1037515241, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A6 CR Turbo Diesel3.0 diesel · 203.9PS / 150.0kW
Control unit
Bosch EDC17CP44
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
4G0907401
Software number
1037515241
Software / calibration
4G0907311B

Technical data

Vehicle
BrandAudi
Car modelA6 CR Turbo Diesel
Engine3.0 diesel
Power203.9PS / 150.0kW
Control unit
Control unitBosch EDC17CP44
ECU makerBosch
Hardware number4G0907401
Software number1037515241
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file nameAudi A6 3.0 TDI CR
File key3e460863807e1419
Identification read from the file
ECU nameEDC17CP44
Read typeCalibration only (data set)
Bosch part / software1037515241Offset in the file: 0x14001A
Vehicle maker's hardware number4G0907401Offset in the file: 0x1991C4
Software / calibration4G0907311B · version 0001Offset in the file: 0x1991DE
Bosch project identifier (EPK)37/1/EDC17_CP44/5/P1071//C1071C5W7///Offset in the file: 0x140A14

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP44 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4G0907401 and software number 1037515241. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP44

HardwareSoftwareVehicles
4G09074011037510955Audi A8, Audi A8 3.0 TDI CR
4G09074011037511950Audi A8, Audi A8 3.0 TDI
4G09074011037511968Audi A7, Audi A7 3.0 TDI CR, Audi Q7
4G09074011037513666Audi A6
4G09074011037515579Audi A6
4G09074011037518039Porsche Cayenne CR 2011 Turbo, Porsche Cayenne Diesel CR Turbo
4G09074011037518040Porsche Cayenne CR 2011 Turbo
4G09074011037518081Audi A8, Audi A8 3.0 TDI CR, Audi A8 3.0 TDI CR DPF V6

Bosch EDC17CP44 original files

The Bosch EDC17CP44 unit page