Original file

Porsche Cayenne Diesel CR Turbo Bosch EDC17CP44 4G0907401 / 1037518039

An original (stock) flash read of the Bosch EDC17CP44 control unit, fitted in Porsche Cayenne Diesel CR Turbo, hardware number 4G0907401 and software number 1037518039, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Porsche Cayenne Diesel CR Turbo3.0 diesel · 245.0PS / 180.2kW
Control unit
Bosch EDC17CP44
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
4G0907401
Software number
1037518039
Software / calibration
7P5907401D

Technical data

Vehicle
BrandPorsche
Car modelCayenne Diesel CR Turbo
Engine3.0 diesel
Power245.0PS / 180.2kW
Control unit
Control unitBosch EDC17CP44
ECU makerBosch
Hardware number4G0907401
Software number1037518039
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
From the file namePorsche Cayenne Diesel 3.0 TDI
File key5c930a66e93e7a09
Identification read from the file
ECU nameEDC17CP44
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software1037518039Offset in the file: 0x02001A
Vehicle maker's hardware number4G0907401Offset in the file: 0x39AE3E
Software / calibration7P5907401D · version 0001Offset in the file: 0x39AE58
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FE50
Bosch project identifier (EPK)37/1/EDC17_CP44/5/P1071//C1071B0AB///Offset in the file: 0x0404B8

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP44 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4G0907401 and software number 1037518039. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Porsche Cayenne CR 2011 TurboFlash · From the file name: Porsche Cayenne 3.0 TDI CR2,048.00 KB€15Add to cart

All reads of 4G0907401 / 1037518039

Other pairs of Bosch EDC17CP44

HardwareSoftwareVehicles
4G09074011037511968Audi A7, Audi A7 3.0 TDI CR, Audi Q7
4G09074011037513666Audi A6
4G09074011037515241Audi A6 CR Turbo Diesel
4G09074011037515579Audi A6
4G09074011037518040Porsche Cayenne CR 2011 Turbo
4G09074011037518081Audi A8, Audi A8 3.0 TDI CR, Audi A8 3.0 TDI CR DPF V6
4G09074011037518146Audi A7
4G09074011037518151Audi

Bosch EDC17CP44 original files

The Bosch EDC17CP44 unit page