Original file

Audi Bosch EDC17CP44 4G0907401 / 1037519312

An original (stock) flash read of the Bosch EDC17CP44 control unit, fitted in Audi, hardware number 4G0907401 and software number 1037519312, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi3.0 diesel 203PS
Control unit
Bosch EDC17CP44
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
4G0907401
Software number
1037519312
Software / calibration
8K5907311

Technical data

Vehicle
BrandAudi
Engine3.0 diesel 203PS
Power203.9PS / 150.0kW
Control unit
Control unitBosch EDC17CP44
ECU makerBosch
Hardware number4G0907401
Software number1037519312
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key8bb9ce95993b165f
Identification read from the file
ECU nameEDC17CP44
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software1037519312Offset in the file: 0x02001A
Vehicle maker's hardware number4G0907401Offset in the file: 0x39AE3E
Software / calibration8K5907311 · version 0001Offset in the file: 0x39AE58
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FE50
Bosch project identifier (EPK)37/1/EDC17_CP44/5/P1071//C1071B0AB///Offset in the file: 0x0404B8

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP44 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4G0907401 and software number 1037519312. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Audi A6Flash4,096.00 KB€15Add to cart
Audi A5Flash4,096.00 KB€15Add to cart
Audi A5Flash4,096.00 KB€15Add to cart
Audi A5Flash4,096.00 KB€15Add to cart
Audi A5Flash4,096.00 KB€15Add to cart
Audi A5Flash4,096.00 KB€15Add to cart
Audi A7Flash4,096.00 KB€15Add to cart
Audi A7Flash4,096.00 KB€15Add to cart
Audi A5Flash2,048.00 KB€15Add to cart
AudiFlash4,096.00 KB€15Add to cart
Audi A5Flash4,096.00 KB€15Add to cart
Audi A5Flash4,096.00 KB€15Add to cart

All reads of 4G0907401 / 1037519312

Other pairs of Bosch EDC17CP44

HardwareSoftwareVehicles
4G09074011037518146Audi A7
4G09074011037518151Audi
4G09074011037518172Audi A7 CR 2011 Turbo, Audi A6
4G09074011037518187Volkswagen Touareg V6 CR 2012
4G09074011037521645Audi A8
4G09074011037521649Audi A6 3.0 TDI, Audi A6
4G09074011037521664Audi A4 3.0 TDI, Audi A5 3.0 TDI, Audi A5 3.0 TDI CR
4G09074011037521696Audi A4 Allroad Quattro 3.0 TDI CR DPF, Audi A5 3.0 TDI CR, Audi A5

Bosch EDC17CP44 original files

The Bosch EDC17CP44 unit page