Original file

Volkswagen Touareg V6 CR 2013 Bosch EDC17CP44 4G0907401 / 1037525578

An original (stock) flash read of the Bosch EDC17CP44 control unit, fitted in Volkswagen Touareg V6 CR 2013, hardware number 4G0907401 and software number 1037525578, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Touareg V6 CR 20133.0 diesel · 203.9PS / 150.0kW
Control unit
Bosch EDC17CP44
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
4G0907401
Software number
1037525578
Software / calibration
7P0907311C

Technical data

Vehicle
BrandVolkswagen
Car modelTouareg V6 CR 2013
Engine3.0 diesel
Power203.9PS / 150.0kW
Control unit
Control unitBosch EDC17CP44
ECU makerBosch
Hardware number4G0907401
Software number1037525578
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
From the file nameVW Touareg 3.0 V6 TDI
File key15081d47865b0888
Identification read from the file
ECU nameEDC17CP44
Read typeCalibration only (data set)
Bosch part / software1037525578Offset in the file: 0x14001A
Vehicle maker's hardware number4G0907401Offset in the file: 0x19BBCE
Software / calibration7P0907311C · version 0003Offset in the file: 0x19BBE8
Bosch project identifier (EPK)37/1/EDC17_CP44/5/P1071//C1071B0AH///Offset in the file: 0x140A14

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP44 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4G0907401 and software number 1037525578. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP44

HardwareSoftwareVehicles
4G09074011037522902Audi A5 3.0 TDI, Audi Q5
4G09074011037522947Audi A5 CR 2013 Turbo
4G09074011037524622Audi A6
4G09074011037525563Porsche Cayenne CR 2012 Turbo
4G09074011037525584Volkswagen Touareg V6 CR 2013
4G09074011037528339Audi A4 CR 2012 Turbo, Audi Q5
4G09074011037532818Audi A8 3.0 TDI, Audi A8, Audi A8 3.0 TDI CR
4G09074011037532819Audi A6 CR 2011 Turbo, Audi A6 CR 2014 Turbo, Audi A6

Bosch EDC17CP44 original files

The Bosch EDC17CP44 unit page