Original file

Audi A8 Bosch EDC17CP44 4G0907401 / 1037556964

An original (stock) flash read of the Bosch EDC17CP44 control unit, fitted in Audi A8, hardware number 4G0907401 and software number 1037556964, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A83.0 diesel 250PS
Control unit
Bosch EDC17CP44
Read type
Calibration only (data set)
File
4,096.00 KB · Flash
Hardware number
4G0907401
Software number
1037556964
Software / calibration
4H0907401

Technical data

Vehicle
BrandAudi
Car modelA8
Engine3.0 diesel 250PS
Power250.2PS / 184.0kW
Control unit
Control unitBosch EDC17CP44
ECU makerBosch
Hardware number4G0907401
Software number1037556964
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyc20e01be068d48d1
Identification read from the file
ECU nameEDC17CP44
Read typeCalibration only (data set)
Bosch part / software1037556964Offset in the file: 0x34001A
Vehicle maker's hardware number4G0907401Offset in the file: 0x39AD14
Software / calibration4H0907401 · version 0009Offset in the file: 0x39AD2E
Bosch project identifier (EPK)37/1/EDC17_CP44/5/P1071//C1071C5WB///Offset in the file: 0x340A14

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP44 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4G0907401 and software number 1037556964. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Audi A8Flash4,096.00 KB€15Add to cart
Audi A8Flash4,096.00 KB€15Add to cart
Audi A8Flash4,096.00 KB€15Add to cart
Audi A8 3.0 TDIFlash4,096.00 KB€15Add to cart
Audi A8 3.0 TDIFlash4,096.00 KB€15Add to cart

All reads of 4G0907401 / 1037556964

Other pairs of Bosch EDC17CP44

HardwareSoftwareVehicles
4G09074011037544696Audi A4 3.0 TDI, Audi A4 3.0 TDI CR, Audi A4
4G09074011037556952Audi A6 3.0 V6 TDI CR, Audi A4, Audi A6
4G09074011037556960Audi A7 Sportback 245 BHP
4G09074011037556963Audi A4, Audi A4 3.0 TDI CR, Audi A4 3.0 TDI Quattro - 239hp
4G09074011037556965Audi A6
4G09074011037556969Audi A6
4G09074011037556972Audi A6
4G090740110SW034469Volkswagen

Bosch EDC17CP44 original files

The Bosch EDC17CP44 unit page