Original file

Audi A6 Bosch EDC17CP44 4G0907401 / 1037556965

An original (stock) flash read of the Bosch EDC17CP44 control unit, fitted in Audi A6, hardware number 4G0907401 and software number 1037556965, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A63.0 diesel
Control unit
Bosch EDC17CP44
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
4G0907401
Software number
1037556965
Software / calibration
4H0907311

Technical data

Vehicle
BrandAudi
Car modelA6
Engine3.0 diesel
Control unit
Control unitBosch EDC17CP44
ECU makerBosch
Hardware number4G0907401
Software number1037556965
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
From the file nameAudi A6 3.0 TDI EDC17CP44
File key94986fa66322453f
Identification read from the file
ECU nameEDC17CP44
Read typeFull read (boot area included)
Bosch part / software1037556965Offset in the file: 0x02001A
Vehicle maker's hardware number4G0907401Offset in the file: 0x39AD14
Software / calibration4H0907311 · version 0003Offset in the file: 0x39AD2E
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FE50
Bosch project identifier (EPK)37/1/EDC17_CP44/5/P1071//C1071C5WB///Offset in the file: 0x03FFB0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP44 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4G0907401 and software number 1037556965. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP44

HardwareSoftwareVehicles
4G09074011037556952Audi A6 3.0 V6 TDI CR, Audi A4, Audi A6
4G09074011037556960Audi A7 Sportback 245 BHP
4G09074011037556963Audi A4, Audi A4 3.0 TDI CR, Audi A4 3.0 TDI Quattro - 239hp
4G09074011037556964Audi A8, Audi A8 3.0 TDI
4G09074011037556969Audi A6
4G09074011037556972Audi A6
4G090740110SW034469Volkswagen
4G090740110SW045186Audi A6

Bosch EDC17CP44 original files

The Bosch EDC17CP44 unit page