Original file

Audi Bosch EDC17CP44 4G0907401 / 10SW051381

An original (stock) flash read of the Bosch EDC17CP44 control unit, fitted in Audi, hardware number 4G0907401 and software number 10SW051381, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi
Control unit
Bosch EDC17CP44
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
4G0907401
Software number
10SW051381
Software / calibration
4H0997311

Technical data

Vehicle
BrandAudi
Control unit
Control unitBosch EDC17CP44
ECU makerBosch
Hardware number4G0907401
Software number10SW051381
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key0d3a82a7fefe1dc0
Identification read from the file
ECU nameEDC17CP44
Read typeFull read (boot area included)
Bosch part / software10SW051381Offset in the file: 0x02001A
Vehicle maker's hardware number4G0907401Offset in the file: 0x39B6CC
Software / calibration4H0997311 · version 0002Offset in the file: 0x39B6E6
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FE50
Bosch project identifier (EPK)37/1/EDC17_CP44/5/P1071//C1071C5WE///Offset in the file: 0x040014

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP44 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4G0907401 and software number 10SW051381. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17CP44

HardwareSoftwareVehicles
4G090740110SW050945Audi A6
4G090740110SW051062Audi A4
4G090740110SW051172Audi A8
4G090740110SW051172 1071C5WCAudi A8 3.0 TDI
4G090740110SW051449Audi A5 Cabriolet, Audi A5
4G090740110SW051956Audi A6, Audi A4
4G090740110SW054595Audi A5, Audi Q5, Audi A4
4G09074014G0907401Audi A6, Audi A8, Audi 8F

Bosch EDC17CP44 original files

The Bosch EDC17CP44 unit page