Original file

Audi A6 Bosch EDC17CP44 4G0907401 / 4G0907401

An original (stock) flash read of the Bosch EDC17CP44 control unit, fitted in Audi A6, hardware number 4G0907401 and software number 4G0907401, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A63.0 diesel · 203.9PS / 150.0kW
Control unit
Bosch EDC17CP44
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
4G0907401
Software number
4G0907401
Bosch part / software
10SW051956
Software / calibration
4G0997311

Technical data

Vehicle
BrandAudi
Car modelA6
Engine3.0 diesel
Power203.9PS / 150.0kW
Control unit
Control unitBosch EDC17CP44
ECU makerBosch
Hardware number4G0907401
Software number4G0907401
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key90cf7eb997b30357
Identification read from the file
ECU nameEDC17CP44
Read typeFull read (boot area included)
Bosch part / software10SW051956Offset in the file: 0x34001A
Vehicle maker's hardware number4G0907401Offset in the file: 0x22C230
Software / calibration4G0997311 · version 0002Offset in the file: 0x22C24A
Bosch project identifier (EPK)37/1/EDC17_CP44/5/P1071//C1071C5WE///Offset in the file: 0x340A14

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17CP44 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 4G0907401 and software number 4G0907401. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Audi A6Flash2,048.00 KB€15Add to cart
Audi 8FFlash4,096.00 KB€15Add to cart
Audi A8Flash4,096.00 KB€15Add to cart
Audi A8Flash4,096.00 KB€15Add to cart
Audi A5Flash4,096.00 KB€15Add to cart

All reads of 4G0907401 / 4G0907401

Other pairs of Bosch EDC17CP44

HardwareSoftwareVehicles
4G090740110SW051381Audi
4G090740110SW051449Audi A5 Cabriolet, Audi A5
4G090740110SW051956Audi A6, Audi A4
4G090740110SW054595Audi A5, Audi Q5, Audi A4
4G09074014G0997401Audi A6
4G09074014H0907401Audi A6
4G0907401AA10SW000029Volkswagen pcmflash
4G0907401AA10SW022694Volkswagen pcmflash

Bosch EDC17CP44 original files

The Bosch EDC17CP44 unit page